EUVIMEDEUVIMED entdecken
Crossref

Realization of Bullard’s disc dynamo

Raúl Alejandro Avalos-Zúñiga, Jānis Priede

Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · 2023-03 · 479 (2271)

DOI: 10.1098/rspa.2022.0740 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, online erschienen am 08.03.2023. Verfasst von Raúl Alejandro Avalos-Zúñiga und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: National Polytechnic Institute, National Council of Science and Technology of Mexico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We report experimental results from three successful runs of a Bullard-type homopolar disc dynamo. The set-up consisted of a copper disc with a radius of 30 cm and thickness of 3 cm which was placed co-axially beneath a flat, multi-arm spiral coil of the same size and connected to it electrically at the centre and along the circumference by sliding liquid-metal contacts. The magnetic field was measured using Hall probes which were fixed on the top face of the coil. We measured also the radial voltage drop across the coil. When the disc rotation rate reached Ω ≈ 7 Hz , the magnetic field increased steeply approaching B 0 ≈ 40 mT in the central part of the coil. This field was more than two orders of magnitude stronger than the background magnetic field. In the first two runs, the electromagnetic torque braking the disc in the dynamo regime exceeded the breakdown torque of the electric motor driving the disc. As a result, the motor stalled and the dynamo was interrupted. Stalling did not occur in the third run when the driving frequency was set higher and increased faster. We also propose an extended disc dynamo model which qualitatively reproduces the experimental results.

Förderung

  • National Polytechnic Institute
  • National Council of Science and Technology of Mexico

Zitieren

APA

Avalos-Zúñiga, R. A., & Priede, J. (2023). Realization of Bullard’s disc dynamo. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 479(2271). https://doi.org/10.1098/rspa.2022.0740

Vancouver

Avalos-Zúñiga RA, Priede J. Realization of Bullard’s disc dynamo. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 2023;479(2271). doi:10.1098/rspa.2022.0740

BibTeX
@article{AvalosZiga2023,
  author = {Avalos-Zúñiga, Raúl Alejandro and Priede, Jānis},
  title = {Realization of Bullard’s disc dynamo},
  journal = {Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences},
  year = {2023},
  volume = {479},
  number = {2271},
  doi = {10.1098/rspa.2022.0740}
}
Kostenlos starten →