EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Capacity and limitations of microfluidic flow to increase solute transport in three-dimensional cell cultures

Willy V Bonneuil iD, Neeraj Katiyar, Maria Tenje, Shervin Bagheri iD

Journal of The Royal Society Interface · 2025

DOI: 10.1098/rsif.2024.0463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Royal Society Interface, 2025. Verfasst von Willy V Bonneuil und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden. Hauptthemen laut MEDLINE: Models, Biological, Cell Culture Techniques, Three Dimensional, Microfluidics, Microfluidic Analytical Techniques. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Olle Engkvists Stiftelse, Department of Engineering Mechanics, KTH Royal Institue of Technology, H2020 European Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Culturing living cells in three-dimensional environments increases the biological relevance of laboratory experiments, but requires solutes to overcome a diffusion barrier to reach the centre of cellular constructs. We present a theoretical and numerical investigation that brings a mechanistic understanding of how microfluidic culture conditions, including chamber size, inlet fluid velocity and spatial confinement, affect solute distribution within three-dimensional cellular constructs. Contact with the chamber substrate reduces the maximally achievable construct radius by 15%. In practice, finite diffusion and convection kinetics in the microfluidic chamber further lower that limit. The benefits of external convection are greater if transport rates across diffusion-dominated areas are high. Those are omnipresent and include the diffusive boundary layer growing from the fluid–construct interface and regions near corners where fluid is recirculating. Such regions multiply the required convection to achieve a given solute penetration by up to 100, so chip designs ought to minimize them. Our results define conditions where complete solute transport into an avascular three-dimensional cell construct is achievable and applies to real chambers without needing to simulate their exact geometries.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Models, BiologicalCell Culture Techniques, Three DimensionalMicrofluidicsMicrofluidic Analytical TechniquesCell Culture TechniquesDiffusionBiological TransportHumans

Stichwörter der Autor:innen

organ-on-chipsolute transportthree-dimensional cell culture

Autor:innen und Institutionen

  • Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden.
  • Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden.
  • Science for Life Laboratory, Uppsala University, Uppsala, Sweden.

ORCID-Profile: Willy V Bonneuil, Shervin Bagheri

Förderung

  • Olle Engkvists Stiftelse
  • Department of Engineering Mechanics, KTH Royal Institue of Technology
  • H2020 European Research Council
  • Knut och Alice Wallenbergs Stiftelse

Zitieren

APA

Bonneuil, W. V., Katiyar, N., Tenje, M., & Bagheri, S. (2025). Capacity and limitations of microfluidic flow to increase solute transport in three-dimensional cell cultures. Journal of The Royal Society Interface. https://doi.org/10.1098/rsif.2024.0463

Vancouver

Bonneuil WV, Katiyar N, Tenje M, Bagheri S. Capacity and limitations of microfluidic flow to increase solute transport in three-dimensional cell cultures. Journal of The Royal Society Interface. 2025. doi:10.1098/rsif.2024.0463

BibTeX
@article{Bonneuil2025,
  author = {Bonneuil, Willy V and Katiyar, Neeraj and Tenje, Maria and Bagheri, Shervin},
  title = {Capacity and limitations of microfluidic flow to increase solute transport in three-dimensional cell cultures},
  journal = {Journal of The Royal Society Interface},
  year = {2025},
  doi = {10.1098/rsif.2024.0463}
}
Kostenlos starten →