Dynamic modelling and simulation of metro train collision and derailment
Transportation Safety and Environment · 24.03.2026 · 8 (1)
DOI: 10.1093/tse/tdaf076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Transportation Safety and Environment, online erschienen am 22.12.2025. Verfasst von Hao Gao und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Science and Technology Program, Science and Technology Research and Development Plan Funded Project of China State Railway Group Co., Ltd., National Key Research and Development Program of China.
Abstract (Originalsprache)
To investigate the dynamic response and instability mechanisms of urban rail vehicles under extreme collision and derailment scenarios, a high-fidelity dynamic simulation model of a metro train system was developed based on the ADAMS/Rail platform. The model integrates three-dimensional nonlinear contact mechanics and structural topological evolution, enabling the simulation of the complete process from normal operation to post-collision derailment. Two representative collision scenarios were designed and analysed: frontal collision and oblique collision. The study systematically evaluated the influence of operating speed (20–40 km/h) and collision angle (90°–70°) on the dynamic behaviour of the train. Simulation results show that train derailment is governed by both speed and collision angle. Frontal collisions at speeds exceeding 40 km/h cause excessive lateral and vertical displacement of the leading wheelsets, triggering derailment, as the energy-absorbing components fail to fully mitigate the impact. Under oblique collision conditions at 30 km/h, derailment probability increases significantly when the collision angle is below 85°, and continuous derailments of multiple wheelsets are observed at an angle of 80°. The wheelset response exhibits marked temporal and spatial sensitivity, with the front wheelsets of the leading car identified as the primary source of instability. The findings offer theoretical insights and engineering guidance for derailment protection structure design, energy absorption system optimization and safety assessment of metro trains under extreme operating conditions.
Förderung
- Sichuan Science and Technology Program
- Science and Technology Research and Development Plan Funded Project of China State Railway Group Co., Ltd.
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
Zitieren
APA
Gao, H., Shi, Y., Shi, H., Xu, J., Dai, H., & Mao, Q. (2026). Dynamic modelling and simulation of metro train collision and derailment. Transportation Safety and Environment, 8(1). https://doi.org/10.1093/tse/tdaf076
Vancouver
Gao H, Shi Y, Shi H, Xu J, Dai H, Mao Q. Dynamic modelling and simulation of metro train collision and derailment. Transportation Safety and Environment. 2026;8(1). doi:10.1093/tse/tdaf076
BibTeX
@article{Gao2026,
author = {Gao, Hao and Shi, Yixuan and Shi, Huailong and Xu, Jingmang and Dai, Huanyun and Mao, Qingzhou},
title = {Dynamic modelling and simulation of metro train collision and derailment},
journal = {Transportation Safety and Environment},
year = {2026},
volume = {8},
number = {1},
doi = {10.1093/tse/tdaf076}
}
EUVIMED