Regulation of micro-/nanotopography and porosity in biomimetic 3D-printed calcium phosphate ceramic scaffolds for enhanced bone regeneration
Regenerative Biomaterials · 22.01.2026 · 13
DOI: 10.1093/rb/rbag073 ↗Kurz gefasst
Fachartikel in der Zeitschrift Regenerative Biomaterials, online erschienen am 17.04.2026. Verfasst von Wenling Dai und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610064, China. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Tianfu Jincheng Laboratory, City of Future Medicine.
Abstract (Originalsprache)
Biphasic calcium phosphate (BCP) scaffolds were developed with the pivotal goal to biomimic natural bone tissue and enhance personalized and accurate repair to further fulfill the needs of regenerative medicine. 3D-printed BCP ceramics were extensively utilized in bone repair because of their customizable attributes and excellent biocompatibility. However, 3D printing technology and high-temperature sintering led to the absence of microporous structure and surface nanostructure in the scaffolds, which could hinder protein adsorption, osteogenic differentiation and bone regeneration. In this work, biomimetic BCP scaffolds featuring adjustable porosity and surface micro-/nanotopography were created by integrating 3D printing technology with a hydrothermal process. These BCP scaffolds had abundant micropores, and there were needlelike whiskers and hollow-tube whiskers distributed in them, which demonstrated special physical and biological properties. Compared with scaffolds sintered at high temperature, these BCP scaffolds possessed higher porosity and smaller grain size, thereby enhancing specific surface area (SSA), ions release, adsorption capacity of protein and facilitating osteogenic differentiation in vitro. In the rat cranial defect model, it was manifested that biomimetic BCP scaffolds could enhance in situ bone regeneration and showed significant osteoconductivity and osteoinductivity in vivo, which demonstrated their promise for deployment in bone tissue engineering and regenerative medicine.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Biomedical Engineering, Sichuan University, Chengdu, Sichuan 610064, China.
- National Engineering Research Center for Biomaterials, Sichuan University, Chengdu, Sichuan 610064, China.
- The Actions Company, Chengdu, Sichuan 641419, China.
Förderung
- National Key Research and Development Program of China
- Tianfu Jincheng Laboratory, City of Future Medicine
Zitieren
APA
Dai, W., Liu, C., Li, S., Zhao, X., Xiao, Y., Zhou, C., Li, K. J. Z., Guo, L., Fan, Y., & Zhang, X. (2026). Regulation of micro-/nanotopography and porosity in biomimetic 3D-printed calcium phosphate ceramic scaffolds for enhanced bone regeneration. Regenerative Biomaterials, 13. https://doi.org/10.1093/rb/rbag073
Vancouver
Dai W, Liu C, Li S, Zhao X, Xiao Y, Zhou C, et al. Regulation of micro-/nanotopography and porosity in biomimetic 3D-printed calcium phosphate ceramic scaffolds for enhanced bone regeneration. Regenerative Biomaterials. 2026;13. doi:10.1093/rb/rbag073
BibTeX
@article{Dai2026,
author = {Dai, Wenling and Liu, Chenxin and Li, Shikui and Zhao, Xingchen and Xiao, Yumei and Zhou, Changchun and Li, Kate Jie Zhang and Guo, Likun and Fan, Yujiang and Zhang, Xingdong},
title = {Regulation of micro-/nanotopography and porosity in biomimetic 3D-printed calcium phosphate ceramic scaffolds for enhanced bone regeneration},
journal = {Regenerative Biomaterials},
year = {2026},
volume = {13},
doi = {10.1093/rb/rbag073}
}
EUVIMED