Bio-functional hydroxyapatite-coated 3D porous polyetherketoneketone scaffold for enhanced osteogenesis and osteointegration in orthopedic applications
Regenerative Biomaterials · 02.01.2024 · 11
DOI: 10.1093/rb/rbae023 ↗Kurz gefasst
Fachartikel in der Zeitschrift Regenerative Biomaterials, online erschienen am 14.03.2024. Verfasst von Huanhuan Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan 610065,…. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Research Fund of Interdisciplinary Innovation, West China Hospital of Stomatology Sichuan University.
Abstract (Originalsprache)
Polyetherketoneketone (PEKK), a high-performance thermoplastic special engineering material, maintains bone-like mechanical properties and has received considerable attention in the biomedical field. The 3D printing technique enables the production of porous scaffolds with a honeycomb structure featuring precisely controlled pore size, porosity and interconnectivity, which holds significant potential for applications in tissue engineering. The ideal pore architecture of porous PEKK scaffolds has yet to be elucidated. Porous PEKK scaffolds with five pore sizes P200 (225 ± 9.8 μm), P400 (411 ± 22.1 μm), P600 (596 ± 23.4 μm), P800 (786 ± 24.2 μm) and P1000 (993 ± 26.0 μm) were produced by a 3D printer. Subsequently, the optimum pore size, the P600, for mechanical properties and osteogenesis was selected based on in vitro experiments. To improve the interfacial bioactivity of porous PEKK scaffolds, hydroxyapatite (HAp) crystals were generated via in situ biomimetic mineralization induced by the phase-transited lysozyme coating. Herein, a micro/nanostructured surface showing HAp crystals on PEKK scaffold was developed. In vitro and in vivo experiments confirmed that the porous PEKK-HAp scaffolds exhibited highly interconnected pores and functional surface structures that were favorable for biocompatibility and osteoinductivity, which boosted bone regeneration. Therefore, this work not only demonstrates that the pore structure of the P600 scaffold is suitable for PEKK orthopedic implants but also sheds light on a synergistic approach involving 3D printing and biomimetic mineralization, which has the potential to yield customized 3D PEKK-HAp scaffolds with enhanced osteoinductivity and osteogenesis, offering a promising strategy for bone tissue engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan 610065, PR China.
- Department of Pharmacy, State Key Laboratory of Biotherapy and Cancer Center, West China Hospital, Sichuan University, Chengdu, Sichuan 610065, PR China.
- Department of Dental Technology, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, Sichuan 610065, PR China.
- Department of Neurosurgery, West China Hospital, West China Medical School, Sichuan University, Chengdu, Sichuan 610065, PR China.
Förderung
- National Natural Science Foundation of China
- Research Fund of Interdisciplinary Innovation
- West China Hospital of Stomatology Sichuan University
Zitieren
APA
Liu, H., Liu, T., Yin, Z., Liu, X., Tan, Y., Zhao, Y., & Yu, H. (2024). Bio-functional hydroxyapatite-coated 3D porous polyetherketoneketone scaffold for enhanced osteogenesis and osteointegration in orthopedic applications. Regenerative Biomaterials, 11. https://doi.org/10.1093/rb/rbae023
Vancouver
Liu H, Liu T, Yin Z, Liu X, Tan Y, Zhao Y, et al. Bio-functional hydroxyapatite-coated 3D porous polyetherketoneketone scaffold for enhanced osteogenesis and osteointegration in orthopedic applications. Regenerative Biomaterials. 2024;11. doi:10.1093/rb/rbae023
BibTeX
@article{Liu2024,
author = {Liu, Huanhuan and Liu, Taiqing and Yin, Zhicheng and Liu, Xiaoyin and Tan, Ying and Zhao, Yuwei and Yu, Haiyang},
title = {Bio-functional hydroxyapatite-coated 3D porous polyetherketoneketone scaffold for enhanced osteogenesis and osteointegration in orthopedic applications},
journal = {Regenerative Biomaterials},
year = {2024},
volume = {11},
doi = {10.1093/rb/rbae023}
}
EUVIMED