EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micro-porous PLGA/ β -TCP/TPU scaffolds prepared by solvent-based 3D printing for bone tissue engineering purposes

Luan P Hatt, Sylvie Wirth, Aapo Ristaniemi, Daniel J Ciric, Keith Thompson iD, David Eglin, Martin J Stoddart iD, Angela R Armiento

Regenerative Biomaterials · 17.01.2023 · 10

DOI: 10.1093/rb/rbad084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Regenerative Biomaterials, online erschienen am 14.09.2023. Verfasst von Luan P Hatt und 7 weiteren Autor:innen. Beteiligte Einrichtung: AO Research Institute Davos, 7270 Davos Platz, Switzerland. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AO, CMF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 3D printing process of fused deposition modelling is an attractive fabrication approach to create tissue-engineered bone substitutes to regenerate large mandibular bone defects, but often lacks desired surface porosity for enhanced protein adsorption and cell adhesion. Solvent-based printing leads to the spontaneous formation of micropores on the scaffold’s surface upon solvent removal, without the need for further post processing. Our aim is to create and characterize porous scaffolds using a new formulation composed of mechanically stable poly(lactic-co-glycol acid) and osteoconductive β-tricalcium phosphate with and without the addition of elastic thermoplastic polyurethane prepared by solvent-based 3D-printing technique. Large-scale regenerative scaffolds can be 3D-printed with adequate fidelity and show porosity at multiple levels analysed via micro-computer tomography, scanning electron microscopy and N2 sorption. Superior mechanical properties compared to a commercially available calcium phosphate ink are demonstrated in compression and screw pull out tests. Biological assessments including cell activity assay and live-dead staining prove the scaffold’s cytocompatibility. Osteoconductive properties are demonstrated by performing an osteogenic differentiation assay with primary human bone marrow mesenchymal stromal cells. We propose a versatile fabrication process to create porous 3D-printed scaffolds with adequate mechanical stability and osteoconductivity, both important characteristics for segmental mandibular bone reconstruction.

Schlagwörter

Stichwörter der Autor:innen

mesenchymal stromal cellsosteogenesisporosityregenerative scaffoldsolvent-based printing

Autor:innen und Institutionen

  • AO Research Institute Davos, 7270 Davos Platz, Switzerland.
  • Institute for Biomechanics, ETH Zürich, 8093 Zürich, Switzerland.
  • UCB Pharma, SL1 3WE Slough, UK.
  • Mines Saint-Étienne, Université de Lyon, Université Jean Monnet, INSERM, U1059, 42023 Sainbiose, Saint-Étienne, France.
  • Medical Center, Faculty of Medicine, Albert-Ludwigs-University of Freiburg, 79106 Freiburg, Germany.

ORCID-Profile: Keith Thompson, Martin J Stoddart

Förderung

  • AO
  • CMF

Zitieren

APA

Hatt, L. P., Wirth, S., Ristaniemi, A., Ciric, D. J., Thompson, K., Eglin, D., Stoddart, M. J., & Armiento, A. R. (2023). Micro-porous PLGA/ β -TCP/TPU scaffolds prepared by solvent-based 3D printing for bone tissue engineering purposes. Regenerative Biomaterials, 10. https://doi.org/10.1093/rb/rbad084

Vancouver

Hatt LP, Wirth S, Ristaniemi A, Ciric DJ, Thompson K, Eglin D, et al. Micro-porous PLGA/ β -TCP/TPU scaffolds prepared by solvent-based 3D printing for bone tissue engineering purposes. Regenerative Biomaterials. 2023;10. doi:10.1093/rb/rbad084

BibTeX
@article{Hatt2023,
  author = {Hatt, Luan P and Wirth, Sylvie and Ristaniemi, Aapo and Ciric, Daniel J and Thompson, Keith and Eglin, David and Stoddart, Martin J and Armiento, Angela R},
  title = {Micro-porous PLGA/ β -TCP/TPU scaffolds prepared by solvent-based 3D printing for bone tissue engineering purposes},
  journal = {Regenerative Biomaterials},
  year = {2023},
  volume = {10},
  doi = {10.1093/rb/rbad084}
}
Kostenlos starten →