An intrinsic polymer electrolyte via in situ cross-linked for solid lithium-based batteries with high performance
PNAS Nexus · 05.09.2023 · 2 (9)
DOI: 10.1093/pnasnexus/pgad263 ↗Kurz gefasst
Fachartikel in der Zeitschrift PNAS Nexus, online erschienen am 05.09.2023. Verfasst von Chen Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Collaborative Innovation Centre of Chemistry for Energy Materials, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen Uni…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Since the introduction of poly(ethylene oxide) (PEO)-based polymer electrolytes more than 50 years, few other real polymer electrolytes with commercial application have emerged. Due to the low ion conductivity at room temperature, the PEO-based electrolytes cannot meet the application requirements. Most of the polymer electrolytes reported in recent years are in fact colloidal/composite electrolytes with plasticizers and fillers, not genuine electrolytes. Herein, we designed and synthesized a cross-linked polymer with a three-dimensional (3D) mesh structure which can dissolve the Li bis(trifluoromethylsulfonyl)imide (LiTFSI) salt better than PEO due to its unique 3D structure and rich oxygen-containing chain segments, thus forming an intrinsic polymer electrolyte (IPE) with ionic conductivity of 0.49 mS cm−1 at room temperature. And it can hinder the migration of large anions (e.g. TFSI−) in the electrolyte and increase the energy barrier to their migration, achieving Li+ migration numbers (tLi+) of up to 0.85. At the same time, IPE has good compatibility with lithium metal cathode and LiFePO4 (LFP) cathode, with stable cycles of more than 2,000 and 700 h in Li//Li symmetric batteries at 0.2 and 0.5 mAh cm−2 current densities, respectively. In addition, the Li/IPE/LFP batteries show the capacity retention >90% after 300 cycles at 0.5 C current density. This polymer electrolyte will be a pragmatic way to achieve commercializing all-solid-state, lithium-based batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Collaborative Innovation Centre of Chemistry for Energy Materials, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, No. 422, Siming South Road, Xiamen, Fujian 361005, China.
ORCID-Profile: Quanfeng Dong
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, C., Hu, A., Zhang, X., Ni, H., Fan, J., Yuan, R., Zheng, M., & Dong, Q. (2023). An intrinsic polymer electrolyte via in situ cross-linked for solid lithium-based batteries with high performance. PNAS Nexus, 2(9). https://doi.org/10.1093/pnasnexus/pgad263
Vancouver
Li C, Hu A, Zhang X, Ni H, Fan J, Yuan R, et al. An intrinsic polymer electrolyte via in situ cross-linked for solid lithium-based batteries with high performance. PNAS Nexus. 2023;2(9). doi:10.1093/pnasnexus/pgad263
BibTeX
@article{Li2023,
author = {Li, Chen and Hu, Ajuan and Zhang, Xinan and Ni, Hongbin and Fan, Jingmin and Yuan, Ruming and Zheng, Mingsen and Dong, Quanfeng},
title = {An intrinsic polymer electrolyte via in situ cross-linked for solid lithium-based batteries with high performance},
journal = {PNAS Nexus},
year = {2023},
volume = {2},
number = {9},
doi = {10.1093/pnasnexus/pgad263}
}
EUVIMED