Pore formation driven by particle impact in laser powder-blown directed energy deposition
PNAS Nexus · 31.05.2023 · 2 (6)
DOI: 10.1093/pnasnexus/pgad178 ↗Kurz gefasst
Fachartikel in der Zeitschrift PNAS Nexus, online erschienen am 26.05.2023. Verfasst von Samantha Webster und 6 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering, Northwestern University, 633 Clark St, 60208 IL, USA. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: U.S. Department of Energy (DOE) Office of Science, Argonne National Laboratory, Center for Hierarchical Materials Design.
Abstract (Originalsprache)
Process defects currently limit the use of metal additive manufacturing (AM) components in industries due to shorter fatigue life, potential for catastrophic failure, and lower strength. Conditions under which these defects form, and their mechanisms, are starting to be analyzed to improve reliability and structural integrity of these highly customized parts. We use in situ, high-speed X-ray imaging in conjunction with a high throughput laser, powder-blown directed energy deposition setup to observe powder particle impact behavior within the melt pool. Through fundamental observations of the stochastic, violent powder delivery in powder-blown DED, we uncover a unique pore formation mechanism. We find that a pore can form due to air-cushioning, where vapor from the carrier gas or environment is entrapped between the solid powder particle surface and liquid melt pool surface. A critical time constant is established for the mechanism, and X-ray computed tomography is used to further analyze and categorize the new type of “air-cushioning” pores. It is shown that the air-cushioning mechanism can occur under multiple laser processing conditions, and we show that air-cushioning pores are more likely to be formed when powder particles are larger than 70 μm. By quantifying the effect of powder particle impact, we identify new avenues for development of high-quality laser, powder-blown DED products. Furthermore, we deepen knowledge on defect formation in metal additive manufacturing, which is being increasingly utilized in high performance situations such as aerospace, automotive, and biomedical industries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering, Northwestern University, 633 Clark St, 60208 IL, USA.
- Materials Science and Engineering Division, National Institute of Standards and Technology, 101 Bureau Dr, 20899 MD, USA.
- Applied Chemicals and Materials Division, National Institute of Standards and Technology, 325 Broadway, 80305 CO, USA.
- X-Ray Science Division, Argonne National Laboratory, 9700 S Cass Ave, 60439 IL, USA.
- Materials Science & Engineering, University of Virginia, 395 McCormick Road, 22904 VA, USA.
ORCID-Profile: Kamel Fezzaa, Jian Cao
Förderung
- U.S. Department of Energy (DOE) Office of Science
- Argonne National Laboratory
- Center for Hierarchical Materials Design
Zitieren
APA
Webster, S., Moser, N., Fezzaa, K., Sun, T., Ehmann, K., Garboczi, E., & Cao, J. (2023). Pore formation driven by particle impact in laser powder-blown directed energy deposition. PNAS Nexus, 2(6). https://doi.org/10.1093/pnasnexus/pgad178
Vancouver
Webster S, Moser N, Fezzaa K, Sun T, Ehmann K, Garboczi E, et al. Pore formation driven by particle impact in laser powder-blown directed energy deposition. PNAS Nexus. 2023;2(6). doi:10.1093/pnasnexus/pgad178
BibTeX
@article{Webster2023,
author = {Webster, Samantha and Moser, Newell and Fezzaa, Kamel and Sun, Tao and Ehmann, Kornel and Garboczi, Edward and Cao, Jian},
title = {Pore formation driven by particle impact in laser powder-blown directed energy deposition},
journal = {PNAS Nexus},
year = {2023},
volume = {2},
number = {6},
doi = {10.1093/pnasnexus/pgad178}
}
EUVIMED