Direct ink writing 3D printing of polydimethylsiloxane-based soft and composite materials: a mini review
Oxford Open Materials Science · 09.02.2022 · 2 (1)
DOI: 10.1093/oxfmat/itac008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Oxford Open Materials Science, online erschienen am 07.10.2022. Verfasst von Yun Li und 1 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polydimethylsiloxane (PDMS) has been widely used in flexible electronics, biomedical tissue/organ devices and soft robots. With the rapid advances in 3D printing technologies, there has been considerable interest in using PDMS to create 3D, high-resolution and multifunctional structures/devices. Among different 3D printing technologies, direct ink writing (DIW), where PDMS-based ink or gel is extruded from a moving nozzle, has demonstrated advantages of low cost, simplicity and ability to combine different materials in a single processing step. Here, we provide a critical perspective on the advances and potential of DIW technology for PDMS-based materials. We will summarize the key factors and innovation in the DIW processes. Furthermore, we will also show state-of-the-art structures and applications of DIW-printed PDMS-based materials. Finally, we hope to point out specific challenges, areas for further development and provide guidelines to those interested in PDMS-based DIW.
Zitieren
APA
Li, Y., & Li, B. (2022). Direct ink writing 3D printing of polydimethylsiloxane-based soft and composite materials: a mini review. Oxford Open Materials Science, 2(1). https://doi.org/10.1093/oxfmat/itac008
Vancouver
Li Y, Li B. Direct ink writing 3D printing of polydimethylsiloxane-based soft and composite materials: a mini review. Oxford Open Materials Science. 2022;2(1). doi:10.1093/oxfmat/itac008
BibTeX
@article{Li2022,
author = {Li, Yun and Li, Bo},
title = {Direct ink writing 3D printing of polydimethylsiloxane-based soft and composite materials: a mini review},
journal = {Oxford Open Materials Science},
year = {2022},
volume = {2},
number = {1},
doi = {10.1093/oxfmat/itac008}
}
EUVIMED