Achieving over 200 Wh kg−1 sodium-ion pouch cell by quantitative engineering of hard carbon pores
National Science Review · 03.02.2026 · 13 (3)
DOI: 10.1093/nsr/nwaf566 ↗Kurz gefasst
Fachartikel in der Zeitschrift National Science Review, online erschienen am 12.12.2025. Verfasst von Zhihao Chen und 14 weiteren Autor:innen. Beteiligte Einrichtung: Hefei National Research Center for Physical Sciences at the Microscale, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), De…. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Chinese Academy of Sciences, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Energy-dense sodium-ion batteries (SIBs) offer lithium-free, cost-effective solutions for grid-scale energy storage. However, the structural complexity of hard carbon (HC) anodes hinders the establishment of a clear structure–performance relationship, leading to the insufficient performance of current HC when paired with advanced cathodes. In this study, we precisely adjusted the content and size of closed pores in HC using an economical, extensible rosin-assisted pore-promoting strategy, and quantified the effective pore volume for sodium storage through small-angle X-ray scattering experiments. We show that optimizing the closed pore size to increase the effective pore volume is key to enhancing the electrochemical performance of HC. By controlling the size (∼2 nm) of closed pores, we enhance the Na-cluster filled volume fraction of HC, resulting in an extended low-potential plateau (<0.1 V vs. Na+/Na) and higher sodium storage capacity. Additionally, we established a positive correlation between the plateau capacity of HC and the effective pore volume. Consequently, the 4.5 Ah pouch-type SIBs assembled with optimized HC here (areal capacity, 2.8 mAh cm−2) achieved a high energy density of 202 Wh kg−1, with over 80% capacity retention after 500 cycles at 0.5 C. This research provides a solution for realizing low-cost, advanced SIBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hefei National Research Center for Physical Sciences at the Microscale, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Department of Materials Science and Engineering, CAS Key Laboratory of M…
- State Key Laboratory for Physical Chemistry of Solid Surfaces, and Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China.
- Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an 710021, China.
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China.
- National Synchrotron Radiation Laboratory, Hefei 230026, China.
ORCID-Profile: Yan Yu
Förderung
- National Natural Science Foundation of China
- Chinese Academy of Sciences
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Chen, Z., Shen, J., Deng, W., Huang, Y., Shan, P., Lou, Y., Li, L., Gao, G., Yang, Y., He, S., Pan, H., Rui, X., Yang, Y., Yang, H., & Yu, Y. (2026). Achieving over 200 Wh kg−1 sodium-ion pouch cell by quantitative engineering of hard carbon pores. National Science Review, 13(3). https://doi.org/10.1093/nsr/nwaf566
Vancouver
Chen Z, Shen J, Deng W, Huang Y, Shan P, Lou Y, et al. Achieving over 200 Wh kg−1 sodium-ion pouch cell by quantitative engineering of hard carbon pores. National Science Review. 2026;13(3). doi:10.1093/nsr/nwaf566
BibTeX
@article{Chen2026,
author = {Chen, Zhihao and Shen, Jialong and Deng, Wenjie and Huang, Yingshan and Shan, Peizhao and Lou, Yuhang and Li, Ling and Gao, Guanyin and Yang, Yaxiong and He, Shengnan and Pan, Hongge and Rui, Xianhong and Yang, Yong and Yang, Hai and Yu, Yan},
title = {Achieving over 200 Wh kg−1 sodium-ion pouch cell by quantitative engineering of hard carbon pores},
journal = {National Science Review},
year = {2026},
volume = {13},
number = {3},
doi = {10.1093/nsr/nwaf566}
}
EUVIMED