Vacuum-assisted vertical component distribution in pseudo-bulk heterojunctions: a pathway to high-performance and stable organic solar cells
National Science Review · 10.11.2025 · 12 (12)
DOI: 10.1093/nsr/nwaf440 ↗Kurz gefasst
Fachartikel in der Zeitschrift National Science Review, online erschienen am 20.10.2025. Verfasst von Jingchao Cheng und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Microelectronics, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Hebei Province, National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Precise control over the vertical component distribution and molecular packing within the photoactive layer is paramount for achieving high-performance organic solar cells (OSCs). However, optimizing these parameters in sequentially deposited pseudo-bulk heterojunction (p-BHJ) architecture remains challenging, often limited by inefficient self-assembly of organic semiconductors. In this work, a post-treatment combining vacuum and thermal annealing (VTA) is adopted. A range of morphological measurements demonstrate that compared with the traditional thermal annealing (TA) treatment, VTA can accelerate solvent evaporation, promoting the crystallization of acceptor at the top surface and inhibiting excessive intermixing between donor and acceptor, and therefore leads to a more stratified p-i-n configuration with interpenetrated donor–acceptor networks. This morphology modulation enhances carrier mobility and suppresses charge recombination, culminating in a champion power conversion efficiency (PCE) of 20.5% for binary OSCs. Furthermore, due to the enhanced crystallinity and more compact molecular packing, the optimized film also exhibits exceptional photo and morphological stability, achieving a T80 of over 3900 hours in a conventional ITO/PEDOT:PSS/PM6/L8-BO/PDINN/Ag structure, and 54 000 h in an interfacial-stable ITO/MoO3/PM6/L8-BO/C60/BCP/Ag structure, under the continuous one-sun illumination with a criterion of ISOS-L-1.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Microelectronics, Wuhan University of Technology, Wuhan 430070, China.
- School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China.
- State Key Laboratory of Advanced Glass Materials, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Tao Wang
Förderung
- Key Research and Development Program of Hebei Province
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Cheng, J., Wang, L., Wang, T., Chen, C., Sun, Y., Zhou, J., Gan, Z., Xia, W., Gao, D., Liu, D., Li, W., & Wang, T. (2025). Vacuum-assisted vertical component distribution in pseudo-bulk heterojunctions: a pathway to high-performance and stable organic solar cells. National Science Review, 12(12). https://doi.org/10.1093/nsr/nwaf440
Vancouver
Cheng J, Wang L, Wang T, Chen C, Sun Y, Zhou J, et al. Vacuum-assisted vertical component distribution in pseudo-bulk heterojunctions: a pathway to high-performance and stable organic solar cells. National Science Review. 2025;12(12). doi:10.1093/nsr/nwaf440
BibTeX
@article{Cheng2025,
author = {Cheng, Jingchao and Wang, Liang and Wang, Tiantian and Chen, Chen and Sun, Yuandong and Zhou, Jing and Gan, Zirui and Xia, Weiyi and Gao, Dawei and Liu, Dan and Li, Wei and Wang, Tao},
title = {Vacuum-assisted vertical component distribution in pseudo-bulk heterojunctions: a pathway to high-performance and stable organic solar cells},
journal = {National Science Review},
year = {2025},
volume = {12},
number = {12},
doi = {10.1093/nsr/nwaf440}
}
EUVIMED