EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Halogenated diphenyl ether solvent additives enable ∼20% efficiency organic solar cells and high-performance opaque/semitransparent modules

Yibo Zhou, Wenyan Su, Zezhou Liang, Qiang Wu, Hairui Bai, Han Liu, Bohao Song, Xiong Li, Bomin Xie, Chang Liu, Yuchan Zhang, Yu Wang und 8 weitere

National Science Review · 09.09.2025 · 12 (10)

DOI: 10.1093/nsr/nwaf346 ↗

Kurz gefasst

Fachartikel in der Zeitschrift National Science Review, online erschienen am 21.08.2025. Verfasst von Yibo Zhou und 19 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Key Scientific and Technological Innovation Team Project of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solvent additives are considered as versatile tools to optimize morphology for boosting power conversion efficiency (PCE) of organic solar cells (OSCs). Here, three halogenated diphenyl ether (DPE) solvent additives (fluorinated DPE-F, chlorinated DPE-Cl and brominated DPE-Br) are developed to optimize active-layer (PM6:L8-BO) morphology. With the halogen atomic weight increases, three additives show a gradually increasing boiling point, while DPE-Cl and DPE-Br have similar but a much higher dipole moment compared to DPE-F. The higher boiling point and dipole moment of DPE-Br are expected to enhance the non-covalent interaction between the additive and L8-BO during the active layer film-forming process, offering improved intermolecular packing, charge transport, exciton dissociation and charge collection. As a result, the DPE-Br-treated OSC achieves a higher PCE (18.40%) compared to the DPE-F- and DPE-Cl-treated ones (17.73% and 18.03%). Impressively, using D18 as the donor, the OSCs based on DPE-Br-processed D18:L8-BO:BTP-eC9 obtain a further boosted PCE of ∼20%, while their 11.6 cm2 opaque and semitransparent modules also achieve high PCEs of 16.42% and 10.50%, respectively, which are among the top values in OSCs and opaque/semitransparent modules. This work highlights that the halogenation in DPE-derived additives is a promising strategy to optimize morphology for obtaining efficient OSCs and modules.

Schlagwörter

Stichwörter der Autor:innen

halogenated diphenyl ethermorphology optimizationorganic solar cells and modulespower conversion efficiencysemitransparent devices

Autor:innen und Institutionen

  • State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China.
  • School of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
  • Key Laboratory of Flexible Optoelectronic Materials and Technology (Ministry of Education), Flexible Display Materials and Technology Co-Innovation Centre of Hubei Province, School of Optoelectronic Materials & Technolo…
  • Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an 710054, China.
  • Department of Physics, Beijing Technology and Business University, Beijing 100048, China.
  • Key Laboratory of Theoretical Organic Chemistry and Functional Molecule of Ministry of Education, School of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China.

ORCID-Profile: Ruijie Ma, Qunping Fan

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Key Scientific and Technological Innovation Team Project of Shaanxi Province
  • China Postdoctoral Science Foundation
  • Sanqin Bochuang Talent Support Project of Shaanxi Province
  • Science and Technology Program of Shaanxi Province
  • University of Science and Technology

Zitieren

APA

Zhou, Y., Su, W., Liang, Z., Wu, Q., Bai, H., Liu, H., Song, B., Li, X., Xie, B., Liu, C., Zhang, Y., Wang, Y., Cao, J., Liao, X., Lu, G., Liu, Y., Ma, R., Du, H., Ma, W., & Fan, Q. (2025). Halogenated diphenyl ether solvent additives enable ∼20% efficiency organic solar cells and high-performance opaque/semitransparent modules. National Science Review, 12(10). https://doi.org/10.1093/nsr/nwaf346

Vancouver

Zhou Y, Su W, Liang Z, Wu Q, Bai H, Liu H, et al. Halogenated diphenyl ether solvent additives enable ∼20% efficiency organic solar cells and high-performance opaque/semitransparent modules. National Science Review. 2025;12(10). doi:10.1093/nsr/nwaf346

BibTeX
@article{Zhou2025,
  author = {Zhou, Yibo and Su, Wenyan and Liang, Zezhou and Wu, Qiang and Bai, Hairui and Liu, Han and Song, Bohao and Li, Xiong and Xie, Bomin and Liu, Chang and Zhang, Yuchan and Wang, Yu and Cao, Jiamin and Liao, Xunfan and Lu, Guanghao and Liu, Yuhang and Ma, Ruijie and Du, Huiling and Ma, Wei and Fan, Qunping},
  title = {Halogenated diphenyl ether solvent additives enable ∼20% efficiency organic solar cells and high-performance opaque/semitransparent modules},
  journal = {National Science Review},
  year = {2025},
  volume = {12},
  number = {10},
  doi = {10.1093/nsr/nwaf346}
}
Kostenlos starten →