Indium Tin Oxide Substrates Enable Coating-Free SEM Imaging and Simplified Preparation of Purified Fibrinogen Clots
Microscopy and Microanalysis · 12.10.2026 · 32 (6)
DOI: 10.1093/mam/ozag116 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 11.11.2026. Verfasst von Can Cai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Wake Forest University, 2090 Eure Drive, Winston-Salem, NC 27109, USA. Hauptthemen laut MEDLINE: Fibrinogen, Microscopy, Electron, Scanning, Tin Compounds, Fibrin. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NHLBI NIH HHS, NIH HHS, National Institutes of Health.
Abstract (Originalsprache)
Scanning electron microscopy (SEM) of fibrin fibers typically requires time-consuming preparation and conductive sputter coating, which can alter nanoscale structural measurements. Additionally, protocols for purified fibrinogen clots often include unnecessary steps adapted from plasma clot methods. We aimed to evaluate indium tin oxide (ITO) as a flat, conductive SEM substrate, investigate sputter coating effects on fiber diameter, and simplify purified fibrinogen clot preparation. Platelet-poor plasma and purified fibrinogen clots were formed on ITO substrates and imaged via SEM after 0, 45, or 90 s of sputter coating to quantify diameter variations. For purified clots, a simplified protocol—forming and imaging clots directly on ITO—was compared against a standardized workflow involving clot transfer from microtube lids to carbon tape. Sputter coating duration significantly affected fiber measurements, with longer coating times increasing apparent diameters. Plasma and purified clots showed distinct responses. Crucially, the simplified ITO protocol produced fiber diameter measurements that did not differ significantly from the standardized workflow under identical coating conditions. ITO is an effective conductive substrate that simplifies purified fibrinogen clot preparation by eliminating washing and transfer steps. It yields comparable diameter measurements to standard methods, offering an efficient platform for analyzing fibrin structures.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Physics, Wake Forest University, 2090 Eure Drive, Winston-Salem, NC 27109, USA.
- Department of Physics, East Carolina University, 1000 E. 5th Street, Greenville, NC 27885, USA.
- Department of Mathematics and Statistics, University of Central Oklahoma, 100 N. University Drive, Edmond, OK 73034, USA.
ORCID-Profile: Can Cai, Martin Guthold
Förderung
- NHLBI NIH HHS
- NIH HHS
- National Institutes of Health
Zitieren
APA
Cai, C., Flake, C., Nameny, A., Hudson, N. E., Bannish, B. E., & Guthold, M. (2026). Indium Tin Oxide Substrates Enable Coating-Free SEM Imaging and Simplified Preparation of Purified Fibrinogen Clots. Microscopy and Microanalysis, 32(6). https://doi.org/10.1093/mam/ozag116
Vancouver
Cai C, Flake C, Nameny A, Hudson NE, Bannish BE, Guthold M. Indium Tin Oxide Substrates Enable Coating-Free SEM Imaging and Simplified Preparation of Purified Fibrinogen Clots. Microscopy and Microanalysis. 2026;32(6). doi:10.1093/mam/ozag116
BibTeX
@article{Cai2026,
author = {Cai, Can and Flake, Caela and Nameny, Arezoo and Hudson, Nathan E and Bannish, Brittany E and Guthold, Martin},
title = {Indium Tin Oxide Substrates Enable Coating-Free SEM Imaging and Simplified Preparation of Purified Fibrinogen Clots},
journal = {Microscopy and Microanalysis},
year = {2026},
volume = {32},
number = {6},
doi = {10.1093/mam/ozag116}
}
EUVIMED