Low-loss EELS Analysis of Heterogenous Perovskite Interfaces
Microscopy and Microanalysis · 27.07.2026 · 32 (Supplement_1)
DOI: 10.1093/mam/ozag053.794 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 27.07.2026. Verfasst von Hayden C Barry und 3 weiteren Autor:innen. Die Arbeit nennt 3 Literaturangaben.
Abstract (Originalsprache)
Complex oxide interfaces have captivated the research community in the last 15 years due to the emergent nanoscale phenomena they have exhibited; directly owing to their strong interaction among charge, spin, orbital, and structural degrees of freedom [1]. Studying these interfaces across a few unit cells is challenging with conventional methods, as optical probes tend to be around 1 μm in diameter. This makes it impossible to study an individual interface of a vertically stacked transition metal oxide from a cross-sectional sample as the optical probe collects an averaged signal from each layer. In this talk, electron probes are used to overcome the diffraction-limit set by optical probes by first using aberration-corrected scanning transmission electron microscopy (STEM) combined with core-loss electron energy loss spectroscopy (EELS) to construct atomic-resolution quantification maps of the perovskite interfaces, shown in Fig. 1a. A corresponding line profile is shown in Fig. 1b, created by binning the spectrum image along the x-axis and integrating the pixels horizontally to increase the signal-to-noise ratio in the plot. The black dotted lines are positioned where the interfaces are present between the top layer, (LaScO3) the middle layer, (SrTiO3) and the bottom layer (LaMnO3). Next, monochromated EELS is used to couple unprecedented energy resolution and spatial resolution to do optical and vibrational spectroscopy at the interfaces. This is done by converging electrons to a focused beam to collect spectroscopic signal at the interface at the onset of the atomic transitions [2]. The presented data will combine our analysis of both on-axis and off-axis, produced by dipole scattering and impact scattering, respectively; to differentiating the signal in the low-loss spectrum from excitations produced from delocalized and localized processes. The objective by collecting both signals with all measurements is to create a signal dominated by scattering produced from individual atoms so that the long-range contributions are suppressed, and band edges can be resolved without plasmon interference. Ultimately, we aim to introduce a novel technique to determine the structure-property relationship of complex oxides to bring oxide-electronics to new heights [3]. STEM-EELS analysis of perovskite oxide interfaces. (a) Atomically-resolved chemical profiles, with the scale bar corresponding to 2 nm. (b) Line profile of the corresponding image in (a), to see the chemically-abrupt transitions of the elemental distributions (note that Sr is omitted). (c) EELS spanning the optical region of the Sr-containing and La-containing layers. (d) EELS spanning the Infrared region of the Sr-containing and La-containing layers.
Zitieren
APA
Barry, H. C., Rebhorn, E., Hachtel, J. A., & Burns, K. (2026). Low-loss EELS Analysis of Heterogenous Perovskite Interfaces. Microscopy and Microanalysis, 32(Supplement_1). https://doi.org/10.1093/mam/ozag053.794
Vancouver
Barry HC, Rebhorn E, Hachtel JA, Burns K. Low-loss EELS Analysis of Heterogenous Perovskite Interfaces. Microscopy and Microanalysis. 2026;32(Supplement_1). doi:10.1093/mam/ozag053.794
BibTeX
@article{Barry2026,
author = {Barry, Hayden C and Rebhorn, Erik and Hachtel, Jordan A and Burns, Kory},
title = {Low-loss EELS Analysis of Heterogenous Perovskite Interfaces},
journal = {Microscopy and Microanalysis},
year = {2026},
volume = {32},
number = {Supplement_1},
doi = {10.1093/mam/ozag053.794}
}
EUVIMED