Photon Lenses for Aberration Correction in Electron Microscopes
Microscopy and Microanalysis · 27.07.2026 · 32 (Supplement_1)
DOI: 10.1093/mam/ozag053.327 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 27.07.2026. Verfasst von Marius Constantin Chirita Mihaila und 1 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben.
Abstract (Originalsprache)
Improving electron-microscope resolution has long been constrained by reliance on conventional electrostatic and magnetostatic lenses. For nearly a century, lens aberrations have been a persistent obstacle, and they remain especially limiting in uncorrected microscopes, where spherical and chromatic aberrations directly restrict electron-optical performance and achievable resolution. Although multipole aberration correctors can compensate these distortions, practical correction has only been realized within the past three decades [1] enabling sub-atomic resolution [2]. Even today, corrector systems are highly complex, bulky, and costly, often rivaling, or exceeding, the price of the microscope itself. These long-standing limitations have pushed recently the field toward adaptive approaches that, much like a spatial light modulator in photon optics, can reconfigure the electron wavefront. Notably, this kind of dynamic electron-beam shaping can be achieved using an optical field electron modulator (OFEM) in ultrafast electron microscopes [3]. Taking a step towards applications of adaptive electron beam shaping, the chromatic-aberration correction scheme combines a controlled temporal chirp of the electron pulse with a time-dependent effective optical potential of photon lenses [4]. By synchronizing the interaction so that the effective size/strength of the potential evolves across the pulse, electrons of different energies experience tuned focusing, canceling the energy-dependent focal shift and bringing them to a common focal plane. In a complementary route, spherical aberration can be mitigated by imprinting a designed transverse phase profile onto the electron wave via interaction with an engineered Laguerre–Gaussian (LG) laser mode [5]. The first experimental demonstration of spherical aberration correction of traditional electron lenses using a convex photon lens establishes structured light as a compact, single-plane electron-optical corrector and has been done recently [6]. Figure 1 sketches the implementation of light-based spherical-aberration correction for an electron lens in a point-projection geometry, with the electron cross-over located downstream of the sample. In Ref. [6], the cross-over was placed upstream of the sample, demonstrating that the correction principle applies in both configurations. Spherical aberration causes electrons entering the lens at larger radial distance (higher convergence angle) to be focused at shorter focal lengths, producing an angle-dependent shift of the effective image plane. When the sample is an optical standing wave (OSW), this manifests as curved fringes in the point-projection image: the magnification becomes angle dependent and is set by the ratio M(α)=Ld/Lc(α), where Ldis the OSW–detector distance and Lc(α) the OSW–cross-over distance (Fig. 1A). Introducing a convex photon lens at the OFEM plane imprints a compensating phase that suppresses the angular focus dispersion, restores uniform magnification, and yields straight, evenly spaced fringes on the detector (Fig. 1B). This arises because the convex photon lens contributes a spherical-aberration term with the opposite sign to that of the conventional electron lens. More specifically, the dominant third-order (primary) spherical aberration is corrected from Cs≈+2.5mto Cs≈−0.6m, indicating a slight over-compensation; corresponding detector images with the laser beam disabled and enabled are shown in Fig. 2A and Fig. 2B, respectively. The fit function used to evaluate the fringes from Fig. 2 must be updated from Ref. [6] because, for a cross-over located downstream of the OSW, the angle-dependent OSW–cross-over distance becomes Lc(α) = d0−Csα2 (instead of Lc(α) = d0+Csα2), so M(α) increases with α. Implemented as a coherent phase-imprinting interaction, the method is architecturally simple, intrinsically lossless, and preserves beam coherence by avoiding material elements and apertures. Lastly, we will report progress toward continuous-wave electron aberration correction using cavity-enhanced optical fields [7]. A Under spherical aberration, the focus shifts with convergence angle, so different angular components of the beam come to focus at different axial positions instead of a single plane. This angle dependence distorts the point projection of an optical standing wave: fringes that are evenly spaced in the field appear curved on the detector because the magnification varies with deviation angle. B Introducing the LG beam of charge 1 (OFEM) compensates the spherical aberration of the traditional electron lens. With the corrector applied, the electron paths are refocused onto a common focal plane, and the fringes recover as straight, uniformly spaced lines. A Point projection image of the optical standing wave recorded at the detector under spherical aberration, showing curved fringes. B Corresponding detector image after aberration correction, with fringes restored to straight, uniformly spaced bands. The spherical-aberration coefficient Cs is obtained by fitting the measured fringe curvature in the detector images.
Zitieren
APA
Mihaila, M. C. C., & Kozák, M. (2026). Photon Lenses for Aberration Correction in Electron Microscopes. Microscopy and Microanalysis, 32(Supplement_1). https://doi.org/10.1093/mam/ozag053.327
Vancouver
Mihaila MCC, Kozák M. Photon Lenses for Aberration Correction in Electron Microscopes. Microscopy and Microanalysis. 2026;32(Supplement_1). doi:10.1093/mam/ozag053.327
BibTeX
@article{Mihaila2026,
author = {Mihaila, Marius Constantin Chirita and Kozák, Martin},
title = {Photon Lenses for Aberration Correction in Electron Microscopes},
journal = {Microscopy and Microanalysis},
year = {2026},
volume = {32},
number = {Supplement_1},
doi = {10.1093/mam/ozag053.327}
}
EUVIMED