EUVIMEDEUVIMED entdecken
Crossref

Spatially Resolved Pair Distribution Functions from 4D-STEM Total Scattering Across Metal Oxide Interfaces

Hye Sol Kim, Matthew G Boebinger, Scott C Warren

Microscopy and Microanalysis · 27.07.2026 · 32 (Supplement_1)

DOI: 10.1093/mam/ozag053.052 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 27.07.2026. Verfasst von Hye Sol Kim und 2 weiteren Autor:innen. Die Arbeit nennt 3 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Amorphous metal oxides are widely used as coatings on crystalline materials in technologies ranging from batteries and catalysts to semiconductor devices. However, the atomic-scale structure of buried amorphous/crystalline interfaces remains poorly understood because the interfacial region is only a few nanometers thick and amorphous layers lack long-range order. Conventional diffraction approaches average over areas too large to isolate these boundaries, preventing quantitative determination of how local coordination, short-range order, and defect populations evolve across the interface. Here we use Å-scale four-dimensional scanning transmission electron microscopy (4D-STEM) [1] to extract site-specific total-scattering signals and compute spatially resolved pair distribution functions (PDFs) across prototypical oxide heterostructures. Two model systems were fabricated by atomic layer deposition (ALD): (1) amorphous Al2O3 deposited on crystalline anatase TiO2(001), and (2) multilayers of amorphous Al2O3 and amorphous TiO2 with tunable cycle ratios. Cross-sectional TEM specimens were prepared by focused ion beam (FIB) lift-out and finished with low-kV polishing to minimize ion-induced damage. GI-XRD confirms conversion of the TiO2 film to phase-pure anatase after annealing, while AFM shows an atomically smooth surface with angstrom-scale height variation, ensuring that interfacial structure is not dominated by roughness. Cross-sectional TEM reveals sharp, planar interfaces in both the crystalline TiO2/amorphous Al2O3 bilayer and the fully amorphous multilayers. Energy-dispersive X-ray spectroscopy (EDS) verifies chemically abrupt layer sequences and confirms that Al and Ti signal intensities follow the programmed ALD cycle ratios across multilayer stacks. To quantify local structure, we acquired site-specific 4D-STEM diffraction datasets using a Nion UltraSTEM U100 operated at 100 kV, using a fast sCMOS detector for high-speed convergent-beam electron diffraction (CBED) pattern collection. Probe positions within amorphous TiO2 and amorphous Al2O3 layers yield CBED patterns consisting solely of diffuse halos, confirming the absence of crystallinity. In contrast, probe positions within the annealed TiO2 region show sharp diffraction disks consistent with anatase, even within a few nanometers of the interface. These data demonstrate that Å-scale 4D-STEM can isolate total scattering from buried interfacial zones that cannot be separated using selected-area apertures. To quantify local structure, we processed the 4D-STEM datacubes using py4DSTEM [2] to generate azimuthally averaged total-scattering profiles and compute spatially resolved PDFs across the amorphous layers, crystalline TiO2, and the interfacial region. The resulting PDFs exhibit systematic changes in peak positions and relative intensities as the probe approaches the crystalline boundary, indicating measurable evolution in short-range order across the buried interface. These experimentally derived PDFs provide direct real-space constraints for atomistic modeling. Ongoing work will apply Hybrid Reverse Monte Carlo (HRMC) [3] refinement to generate three-dimensional structural ensembles that simultaneously reproduce the measured PDFs and enforce chemically realistic bonding through an interatomic potential. Comparing HRMC-refined structures from the crystalline TiO2/amorphous Al2O3 interface and fully amorphous Al2O3/TiO2 multilayers will enable quantitative determination of how coordination motifs, bond-angle distributions, and defect populations depend on crystallinity and composition. This combined 4D-STEM + PDF + HRMC workflow establishes a general pathway for solving buried amorphous/crystalline interfaces in technologically important oxide coatings. (a) Cross sectional TEM image of the amorphous Al2O3/crystalline TiO2 bilayer and (b) the amorphous Al2O3/TiO2 multilayer stack. (c) Spatially averaged CBED pattern acquired from the crystalline TiO2 region, showing sharp diffraction disks, and (d) CBED acquired from the amorphous region, exhibiting a diffuse halo. Expected HRMC results for stacked amorphous Al2O3/amorphous Ti2O. (Red=oxygen, dark blue=aluminum, light blue=titanium.)

Zitieren

APA

Kim, H. S., Boebinger, M. G., & Warren, S. C. (2026). Spatially Resolved Pair Distribution Functions from 4D-STEM Total Scattering Across Metal Oxide Interfaces. Microscopy and Microanalysis, 32(Supplement_1). https://doi.org/10.1093/mam/ozag053.052

Vancouver

Kim HS, Boebinger MG, Warren SC. Spatially Resolved Pair Distribution Functions from 4D-STEM Total Scattering Across Metal Oxide Interfaces. Microscopy and Microanalysis. 2026;32(Supplement_1). doi:10.1093/mam/ozag053.052

BibTeX
@article{Kim2026,
  author = {Kim, Hye Sol and Boebinger, Matthew G and Warren, Scott C},
  title = {Spatially Resolved Pair Distribution Functions from 4D-STEM Total Scattering Across Metal Oxide Interfaces},
  journal = {Microscopy and Microanalysis},
  year = {2026},
  volume = {32},
  number = {Supplement_1},
  doi = {10.1093/mam/ozag053.052}
}
Kostenlos starten →