EUVIMEDEUVIMED entdecken
Crossref

4D-STEM Ptychography for Correlative Three-Dimensional Atomic Imaging and Spectroscopy

Yu Lei, Peng Wang

Microscopy and Microanalysis · 27.07.2026 · 32 (Supplement_1)

DOI: 10.1093/mam/ozag053.020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 27.07.2026. Verfasst von Yu Lei und 1 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional atomic-scale characterization is crucial for understanding structure–property relationships in functional, energy, and quantum materials. Scanning transmission electron microscopy (STEM), particularly when combined with electron energy-loss spectroscopy (EELS), offers a powerful approach for correlating atomic structure with local chemistry and electronic states [1,2]. However, conventional STEM imaging modes such as high-angle annular dark-field (HAADF) imaging suffer from low dose efficiency, reduced sensitivity to light elements, and intrinsically limited depth resolution [3]. True three-dimensional atomic-layer-resolved imaging typically relies on tilt-series tomography or optical sectioning, which require multiple scans or repeated data acquisition from the same specimen region [4]. This increases experimental complexity and cumulative beam exposure, and therefore restricts applicability, especially for thick or strongly scattering specimens. Recent advances in fast pixelated detectors have enabled four-dimensional STEM (4D-STEM), in which a diffraction pattern is recorded at every probe position. This acquisition mode enables electron ptychography, which retrieves both amplitude and phase information from overlapping diffraction patterns. Ptychography provides improved spatial resolution, enhanced sensitivity to light elements, and superior dose efficiency compared with conventional incoherent imaging [5]. Multislice ptychography further extends these advantages by explicitly modeling electron wave propagation through thick specimens, enabling partial suppression of multiple scattering effects and access to depth-resolved structural information [6]. Despite its strengths, a key limitation has hindered the practical integration of ptychography with EELS. Conventional ptychographic reconstruction requires capturing the full diffraction pattern, including intense low-angle scattered electrons, while EELS relies on collecting these same electrons into the spectrometer. This geometric incompatibility prevents simultaneous high-resolution ptychographic imaging and spectroscopy. Hollow ptychography has been proposed as a solution by excluding the central diffraction region and redirecting low-angle electrons to EELS. However, when applied to thick or strongly scattering specimens, single-slice hollow ptychography suffers from severe multiple-scattering artifacts, leading to degraded contrast and loss of structural fidelity [7]. Here, we introduce multislice hollow ptychography (MHP), a reconstruction framework that combines hollow detector geometries with a multislice forward model and demonstrates its capability for simultaneous three-dimensional atomic imaging and spectroscopy [8]. As illustrated in Fig. 1, a hollow-type pixelated detector allows low-angle electrons to be collected for EELS while higher-angle scattering is recorded for ptychographic reconstruction. The specimen is represented as a stack of thin slices, and the electron probe is propagated sequentially through the sample using a multislice formalism. By explicitly accounting for depth-dependent electron–matter interactions, MHP enables robust phase reconstruction from hollow diffraction patterns and overcomes the limitations of single-slice approaches in strongly scattering specimens. The capabilities of MHP were evaluated using a previously published experimental 4D-STEM datasets of PrScO3[6], combined with simulated data for systematic analysis. Hollow diffraction patterns were generated by applying circular masks with increasing hollow semi-angles to emulate hollow detector geometries (Fig. 2). Single-slice hollow ptychography reconstructions exhibit pronounced degradation with increasing hollow size, including blurred atomic columns and loss of fine structural details. In contrast, multislice hollow ptychography maintains clear atomic contrast and accurate localization across a broad range of hollow semi-angles, demonstrating its robustness against multiple scattering. At intermediate electron doses, MHP achieves sub-angstrom lateral resolution while allowing a large fraction of the incident electrons to be allocated to spectroscopy. This regime is particularly relevant for correlative experiments that require both high-resolution structural imaging and sufficient EELS signal. At lower doses, MHP remains suitable for two-dimensional imaging, although tolerance to large hollow geometries is reduced due to noise. Beyond two-dimensional imaging, MHP enables three-dimensional atomic-layer-resolved reconstruction through optical sectioning. Simulated depth-resolved reconstructions (Fig. 2) show that at high electron doses, atomic layers, including light-element columns, can be resolved along the beam direction even when the central beam is largely excluded. Depth resolution is found to depend primarily on probe convergence angle, electron dose, and thermal lattice vibrations, with the hollow geometry playing a secondary role. In summary, multislice hollow ptychography provides a flexible and dose-efficient framework for simultaneous high-resolution structural imaging and spectroscopy. By resolving the long-standing incompatibility between ptychography and EELS, MHP enables robust three-dimensional atomic-scale characterization of thick and strongly scattering materials. This approach is broadly applicable to complex materials systems and provides a practical pathway toward correlative three-dimensional structural and chemical analysis at the atomic scale. Concept and algorithmic framework of MHP. (a) Schematic of the experimental configuration for MHP, (b) Sectioning a thick sample into a set of thin slices using a multislice approach (a-d) Masked diffraction patterns generated from the experimental data in (a) by applying hollow masks corresponding to HSA = 0α, 0.5α, 0.75α, and 0.95α, respectively, to emulate hollow detector geometries. Reconstructed phase images of PrScO3 using SHP (e-h) and MHP (i-l) with corresponding diffraction patterns in (a-d) Simulated 3D MHP optical sectioning of a PrScO3 crystal with at a CSA of 80 mrad under varying electron dose and HSA conditions. (m-r) Z-slices extracted from three representative positions in the 3D reconstruction of PrScO3 at a dose of 108 e-/Å2 with HSAs of 0α (m-o) and 0.97α (p-r). Reconstructions at lower doses: 107 e-/Å2 with HSAs of 0α (s-u) and 0.75α (v-x).

Zitieren

APA

Lei, Y., & Wang, P. (2026). 4D-STEM Ptychography for Correlative Three-Dimensional Atomic Imaging and Spectroscopy. Microscopy and Microanalysis, 32(Supplement_1). https://doi.org/10.1093/mam/ozag053.020

Vancouver

Lei Y, Wang P. 4D-STEM Ptychography for Correlative Three-Dimensional Atomic Imaging and Spectroscopy. Microscopy and Microanalysis. 2026;32(Supplement_1). doi:10.1093/mam/ozag053.020

BibTeX
@article{Lei2026,
  author = {Lei, Yu and Wang, Peng},
  title = {4D-STEM Ptychography for Correlative Three-Dimensional Atomic Imaging and Spectroscopy},
  journal = {Microscopy and Microanalysis},
  year = {2026},
  volume = {32},
  number = {Supplement_1},
  doi = {10.1093/mam/ozag053.020}
}
Kostenlos starten →