Diffusion Bonding 321-Grade Stainless Steel: Failure and Multimodal Characterization
Microscopy and Microanalysis · 29.04.2024 · 30 (2) · 192-199
DOI: 10.1093/mam/ozae019 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microscopy and Microanalysis, online erschienen am 25.03.2024. Verfasst von Isac Lazar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Division of Synchrotron Radiation Research, Lund University, 221 00 Lund, Sweden. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Swedish Research Council, Sustainable Production Initiative, Lund University.
Abstract (Originalsprache)
Vacuum diffusion-bonded printed circuit heat exchangers are an attractive choice for the high-temperature, high-pressure demands of next-generation energy applications. However, early reports show that the high-temperature materials desired for these applications suffer from poor bond strengths due to precipitation at the bond line, preventing grain boundary migration. In this study, a diffusion bond of the high-temperature stainless steel grade 321H is investigated, and poor mechanical properties are found to be caused by Ti(C, N) precipitation at the bond line. Through in situ studies, it is found that Ti diffuses from the bulk to the mating surfaces at high temperatures. The Ti subsequently precipitates and, for the first time, an interaction between Ti(C, N) and Al/Mg-oxide precipitates at the bond line is observed, where Ti(C, N) nucleates on the oxides forming a core-shell structure. The results indicate that small amounts of particular alloying elements can greatly impact diffusion bond quality, prompting further research into the microstructural evolution that occurs during bonding conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics, Division of Synchrotron Radiation Research, Lund University, 221 00 Lund, Sweden.
- Materials Technology & Chemistry, Alfa Laval, Lund, Sweden.
- Department of Materials Science and Applied Mathematics, Faculty of Technology and Society, Malmö University, 21119 Malmö, Sweden.
- Department of Mechanical Engineering Sciences, Division of Production and Materials Engineering, Lund University, 221 00 Lund, Sweden.
ORCID-Profile: Johan Hektor, Filip Lenrick
Förderung
- Swedish Research Council
- Sustainable Production Initiative
- Lund University
- Chalmers University of Technology
- Swedish Knowledge Foundation
Zitieren
APA
Lazar, I., Knutsson, A., Romero, H. P., Hektor, J., Bushlya, V., Mikkelsen, A., & Lenrick, F. (2024). Diffusion Bonding 321-Grade Stainless Steel: Failure and Multimodal Characterization. Microscopy and Microanalysis, 30(2), 192-199. https://doi.org/10.1093/mam/ozae019
Vancouver
Lazar I, Knutsson A, Romero HP, Hektor J, Bushlya V, Mikkelsen A, et al. Diffusion Bonding 321-Grade Stainless Steel: Failure and Multimodal Characterization. Microscopy and Microanalysis. 2024;30(2):192-199. doi:10.1093/mam/ozae019
BibTeX
@article{Lazar2024,
author = {Lazar, Isac and Knutsson, Axel and Romero, Hector Pous and Hektor, Johan and Bushlya, Volodymyr and Mikkelsen, Anders and Lenrick, Filip},
title = {Diffusion Bonding 321-Grade Stainless Steel: Failure and Multimodal Characterization},
journal = {Microscopy and Microanalysis},
year = {2024},
volume = {30},
number = {2},
pages = {192--199},
doi = {10.1093/mam/ozae019}
}
EUVIMED