EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vertical–horizontal coupled vibration of rolling mill rolls based on an extended Timoshenko beam element

Huajie Wu, Qiaoyi Wang, Laihua Tao, Xin Jiang, Longwei Geng

Journal of Mechanics · 17.02.2026 · 42 · 267-285

DOI: 10.1093/jom/ufag016 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanics, online erschienen am 03.08.2026. Verfasst von Huajie Wu und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to clarify the vertical–horizontal coupled vibration mechanism of rolling mill rolls and to provide a mechanically interpretable model for vibration analysis and structural optimization. An extended Timoshenko beam element is developed for a flexible-roll finite element model, in which each node contains vertical and horizontal translational degrees of freedom together with the corresponding rotational degrees of freedom. Compared with conventional lumped-parameter, rigid-roll or single-plane beam models, the proposed formulation retains the distributed flexibility of the roll along the barrel direction and assembles bending stiffness, shear stiffness, rolling-zone contact stiffness and friction-induced tangential coupling into one global dynamic equation. Modal analysis, stability analysis, time-domain simulation, frequency-response analysis and field measurements are then carried out. The results show that lower-order modes are dominated by vertical motion, whereas higher-order local modes contain more pronounced horizontal vibration components. The flexible-roll model gives a smaller stability margin, and instability is more likely when the friction coefficient is negative and the coupling angle increases. The dominant response appears near the roll center and remains concentrated in the low-frequency range. Field measurements support the predicted trend that vertical vibration dominates the stable low-frequency response, while horizontal vibration mainly appears as an accompanying component induced by structural coupling and load transfer. The model provides a basis for offline stability assessment, vibration mechanism interpretation and structural optimization of rolling mills.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wu, H., Wang, Q., Tao, L., Jiang, X., & Geng, L. (2026). Vertical–horizontal coupled vibration of rolling mill rolls based on an extended Timoshenko beam element. Journal of Mechanics, 42, 267-285. https://doi.org/10.1093/jom/ufag016

Vancouver

Wu H, Wang Q, Tao L, Jiang X, Geng L. Vertical–horizontal coupled vibration of rolling mill rolls based on an extended Timoshenko beam element. Journal of Mechanics. 2026;42:267-285. doi:10.1093/jom/ufag016

BibTeX
@article{Wu2026,
  author = {Wu, Huajie and Wang, Qiaoyi and Tao, Laihua and Jiang, Xin and Geng, Longwei},
  title = {Vertical–horizontal coupled vibration of rolling mill rolls based on an extended Timoshenko beam element},
  journal = {Journal of Mechanics},
  year = {2026},
  volume = {42},
  pages = {267--285},
  doi = {10.1093/jom/ufag016}
}
Kostenlos starten →