Feasibility and emission boundaries of high-compression heavy-duty diesel HCCI
Journal of Mechanics · 17.02.2026 · 42 · 255-266
DOI: 10.1093/jom/ufag015 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanics, online erschienen am 13.07.2026. Verfasst von Wei-Hsiang Wang und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study experimentally investigates the emission compliance boundaries of a heavy-duty diesel engine (Hino W06E) with a high compression ratio (CR) (17.9:1) operating in homogeneous charge compression ignition (HCCI) mode. Retrofitting legacy heavy-duty platforms to HCCI is constrained by limited actuation for thermal management in legacy platforms. Using an external mixture formation strategy with intake air temperatures (IAT) of 150°C and 170°C, this work quantifies the narrow operating corridor constrained by oxidation inefficiency at low loads and nitrogen oxides (NOx) compliance limits at high loads. Raising IAT from 150°C to 170°C substantially improved low-load oxidation in the present engine configuration, reducing HC by 42.5% and CO by ~46% at idle. At 50% load, the 170°C condition produced a pronounced NOx increase (up to 224 ppm), indicating that high-IAT operation in a stock high-compression (CR = 17.9:1) platform is bounded by thermal-NOx formation. These results motivate load-dependent intake thermal management for practical retrofitting.
Zitieren
APA
Wang, W., Muthusamy, T., & Lu, J. (2026). Feasibility and emission boundaries of high-compression heavy-duty diesel HCCI. Journal of Mechanics, 42, 255-266. https://doi.org/10.1093/jom/ufag015
Vancouver
Wang W, Muthusamy T, Lu J. Feasibility and emission boundaries of high-compression heavy-duty diesel HCCI. Journal of Mechanics. 2026;42:255-266. doi:10.1093/jom/ufag015
BibTeX
@article{Wang2026,
author = {Wang, Wei-Hsiang and Muthusamy, Thamaraikannan and Lu, Jau-Huai},
title = {Feasibility and emission boundaries of high-compression heavy-duty diesel HCCI},
journal = {Journal of Mechanics},
year = {2026},
volume = {42},
pages = {255--266},
doi = {10.1093/jom/ufag015}
}
EUVIMED