Heat-mitigation effects of protective sheets in the construction industry for the prevention of heat stress disorders
Journal of Occupational Health · 2026
DOI: 10.1093/joccuh/uiag048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Occupational Health, 2026. Verfasst von Chikage Nagano und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Health Policy and Management, Institute of Industrial Ecological Sciences, University of Occupational and Environmental Health, Japan, …. Hauptthemen laut MEDLINE: Construction Industry, Heat Stress Disorders, Hot Temperature, Occupational Exposure. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Tekken Construction Co, Ltd..
Abstract (Originalsprache)
Objectives
This study experimentally investigated whether highly heat-shielding protective sheets used at construction sites could reduce heat stress.
Methods
A construction-site simulation apparatus was installed in an artificial climate chamber, and direct solar radiation was simulated using infrared heating. Tempered glass partitions allowed the installation of different sheet materials. Wet bulb globe temperature (WBGT), air temperature (Ta), globe temperature (Tg), and relative humidity (RH) were continuously measured on both the indoor and outdoor sides. Three environmental conditions were tested: Ta 30°C, 75% RH; Ta 35°C, 60% RH; and Ta 40°C, 35% RH. Four sheet conditions were evaluated: No-sheet, Brown-sheet, Aluminum-sheet, and Lace sheet. Data collected during the steady-state period (60-120 minutes) were used for comparison.
Results
WBGT was significantly lower under all sheet-installed conditions than under No-sheet condition across all environmental settings. Under Ta 30°C, 75% RH and Ta 35°C, 60% RH environments, Ta and Tg were also significantly lower with sheet installation, suggesting that the sheets reduced radiant heat by blocking infrared radiation. In contrast, under the extremely hot condition of Ta 40°C, 35% RH, no significant differences in Ta or Tg were observed according to sheet installation. Because sheet installation was associated with increased RH, additional measures such as appropriate ventilation may further enhance heat-stress reduction.
Conclusions
Protective sheets may reduce heat stress by attenuating radiant heat under moderately hot conditions, but their heat-shielding effect appears limited under extremely hot conditions. Additional measures, such as appropriate ventilation, may further enhance heat-stress reduction.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Health Policy and Management, Institute of Industrial Ecological Sciences, University of Occupational and Environmental Health, Japan, 1-1 Iseigaoka, Yahatanishi-ku, Kitakyushu 807-8555, Japan.
- Work & Health Occupational Health Consultant Office Nakao, Fukuoka, Japan.
- President's Office, University of Occupational and Environmental Health, Japan, Kitakyushu, Japan.
ORCID-Profile: Chikage Nagano, Kimiyo Mori, Seichi Horie
Förderung
- Tekken Construction Co, Ltd.
Zitieren
APA
Nagano, C., Mori, K., Nakao, Y., & Horie, S. (2026). Heat-mitigation effects of protective sheets in the construction industry for the prevention of heat stress disorders. Journal of Occupational Health. https://doi.org/10.1093/joccuh/uiag048
Vancouver
Nagano C, Mori K, Nakao Y, Horie S. Heat-mitigation effects of protective sheets in the construction industry for the prevention of heat stress disorders. Journal of Occupational Health. 2026. doi:10.1093/joccuh/uiag048
BibTeX
@article{Nagano2026,
author = {Nagano, Chikage and Mori, Kimiyo and Nakao, Yumi and Horie, Seichi},
title = {Heat-mitigation effects of protective sheets in the construction industry for the prevention of heat stress disorders},
journal = {Journal of Occupational Health},
year = {2026},
doi = {10.1093/joccuh/uiag048}
}
EUVIMED