Do it yourself: fabricating and evaluating a mosquito (Diptera: Culicidae) blood-feeding device to replace a commercial option
Journal of Insect Science · 2023
DOI: 10.1093/jisesa/iead072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Insect Science, 2023. Verfasst von M Andrew Dewsnup und 3 weiteren Autor:innen. Beteiligte Einrichtung: Salt Lake City Mosquito Abatement District, 2215 North 2200 West, Salt Lake City, UT 84116, USA. Hauptthemen laut MEDLINE: Aedes, Culex, Culicidae, Entomology. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Tools for rearing hematophagous insects, such as mosquitoes (Diptera: Culicidae), in an insectary are essential for research and operational evaluations in vector biology and control. There is an abundance of low-cost options for practitioners without conventional infrastructure. However, few midrange options exist that provide a balance of efficiency and low material waste. We present here a reproducible design for an electrically powered blood-feeding device that offers long-term reusability, low material waste, and customizability for different species or experiments. The limitation is the requirement for electricity, but the gain is a simple, low-skill device that can be modified as needed. To validate the design, assessments of feeding angle and blood-feeding success were compared between the Salt Lake City Mosquito Abatement District artificial membrane feeder (SLAM) and a commercial system (Hemotek). Engorgement in Aedes aegypti (80–90%), Culex pipiens (50–80%), and Culex tarsalis (30–75%) was similar between the 2 units, resulting in nearly identical fecundity outcomes between devices. Additionally, 45° angles were more successful, generally, than presenting the feeders flat or vertical to the mosquitoes (df3,48, P = 1.014 × 10−15). This angle is simple to present with the SLAM device. Materials for in-house reproduction of the SLAM system are now widely available in regions with access to e-commerce and shipped goods. This results in a device schematic that should fit well into a relatively modular, do-it-yourself paradigm where the practitioner needs only to assemble some materials without complex engineering. This article provides schematics, cost comparison, and validation of the in-house-made SLAM system.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Salt Lake City Mosquito Abatement District, 2215 North 2200 West, Salt Lake City, UT 84116, USA.
ORCID-Profile: Ary Faraji, Christopher S Bibbs
Zitieren
APA
Dewsnup, M. A., Faraji, A., White, G. S., & Bibbs, C. S. (2023). Do it yourself: fabricating and evaluating a mosquito (Diptera: Culicidae) blood-feeding device to replace a commercial option. Journal of Insect Science. https://doi.org/10.1093/jisesa/iead072
Vancouver
Dewsnup MA, Faraji A, White GS, Bibbs CS. Do it yourself: fabricating and evaluating a mosquito (Diptera: Culicidae) blood-feeding device to replace a commercial option. Journal of Insect Science. 2023. doi:10.1093/jisesa/iead072
BibTeX
@article{Dewsnup2023,
author = {Dewsnup, M Andrew and Faraji, Ary and White, Gregory S and Bibbs, Christopher S},
title = {Do it yourself: fabricating and evaluating a mosquito (Diptera: Culicidae) blood-feeding device to replace a commercial option},
journal = {Journal of Insect Science},
year = {2023},
doi = {10.1093/jisesa/iead072}
}
EUVIMED