EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

G-code-level Multi-wall Helical Toolpath Generation for Three-axis Material Extrusion

Taekgwan Nam, Zholan Yegizbayev, Youngjin Park

Journal of Computational Design and Engineering · 11.11.2026

DOI: 10.1093/jcde/qwag098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Computational Design and Engineering, online erschienen am 11.11.2026. Verfasst von Taekgwan Nam und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We propose a G-code-level framework for generating multi-wall helical toolpaths on standard three-axis material extrusion printers, for inputs whose outer-wall shell is self-supporting once interior infill and inner walls are removed. Conventional vase mode is restricted to a single continuous contour and therefore cannot produce multi-wall outputs or handle branching topologies. Using input G-code sliced with aligned seams, our method reconstructs concentric offset contours from the outermost wall and traverses them in an outside-in-out order; applying continuous z-ramping to this path produces helical outputs with up to a user-specified number of walls. Collision-aware reordering exposes consecutive deposition runs, and A*-based planning regenerates the non-extrusion moves between the resulting blocks, checked against the geometry printed so far. For branching geometries, the method inserts local transition zones with a concentric offset infill base and sparse grid infill above, providing a printable surface for helical deposition across splits and merges. On the tested non-branching models, the method eliminates inter-deposition non-extrusion travel, matching vase-mode continuity without its single-wall, single-contour restriction. On the tested branching models, it keeps non-extrusion travel nearly constant as the wall count increases, while operating entirely on unmodified three-axis hardware.

Zitieren

APA

Nam, T., Yegizbayev, Z., & Park, Y. (2026). G-code-level Multi-wall Helical Toolpath Generation for Three-axis Material Extrusion. Journal of Computational Design and Engineering. https://doi.org/10.1093/jcde/qwag098

Vancouver

Nam T, Yegizbayev Z, Park Y. G-code-level Multi-wall Helical Toolpath Generation for Three-axis Material Extrusion. Journal of Computational Design and Engineering. 2026. doi:10.1093/jcde/qwag098

BibTeX
@article{Nam2026,
  author = {Nam, Taekgwan and Yegizbayev, Zholan and Park, Youngjin},
  title = {G-code-level Multi-wall Helical Toolpath Generation for Three-axis Material Extrusion},
  journal = {Journal of Computational Design and Engineering},
  year = {2026},
  doi = {10.1093/jcde/qwag098}
}
Kostenlos starten →