Acoustic-vibration baseline for heavy-haul railways using DM-MFOIS fiber sensing technology
Intelligent Transportation Infrastructure · 11.02.2026 · 5
DOI: 10.1093/iti/liag004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Intelligent Transportation Infrastructure, online erschienen am 26.03.2026. Verfasst von Zheng Li und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China General Program, National Natural Science Foundation of China Basic Science Center Project, Baoshen Company of Baotou-Shenmu Railway, 2022, Research on Railway Rail Condition and Catenary Positioning Analysis System Based on Real-time Acoustic Sensing….
Abstract (Originalsprache)
Aiming at the monitoring needs of heavy-haul railway infrastructure, this study established an off-track, non-contact monitoring system based on Dual-measuring-arm Michelson Fiber Optic Interferometric Sensing (DM-MFOIS) technology, enabling real-time acquisition of train-induced acoustic-vibration signals and baseline construction. However, systematic baselines for different track sections—such as tangent sections, curves, and bridges—using such sensing remain limited. To address this gap, the STA/LTA method was employed for automatic signal segmentation and denoising, while train positioning was achieved by analyzing spectral centroid variations, with an error range of 0.4–0.8 seconds. By applying S-transform and multi-dimensional features, the response characteristics of tangent sections, small-radius curves, and bridge sections under both heavy and light train passages were systematically analyzed. The results indicate: (i) In curved sections, the locomotive position has a significant influence, with distinct impact signals observed at characteristic points. (ii) Bridge sections exhibit intense signal responses; the RMS surges approximately six-fold for light trains and twelve-fold for heavy trains when crossing bridges, with the most pronounced impact at the track-bridge transition zone. (iii) In the case of rail emergency clamp damage, features such as energy concentration at 471 Hz, a spectral centroid valley, and a 7.6% increase in RMS were identified at the damaged location, validating the baseline’s detection capability. The established acoustic-vibration baseline can provide a basis for anomaly warning and intelligent maintenance of railway infrastructure.
Förderung
- National Natural Science Foundation of China General Program
- National Natural Science Foundation of China Basic Science Center Project
- Baoshen Company of Baotou-Shenmu Railway, 2022, Research on Railway Rail Condition and Catenary Positioning Analysis System Based on Real-time Acoustic Sensing…
Zitieren
APA
Li, Z., Xiao, J., Yang, X., Cao, J., & Wang, X. (2026). Acoustic-vibration baseline for heavy-haul railways using DM-MFOIS fiber sensing technology. Intelligent Transportation Infrastructure, 5. https://doi.org/10.1093/iti/liag004
Vancouver
Li Z, Xiao J, Yang X, Cao J, Wang X. Acoustic-vibration baseline for heavy-haul railways using DM-MFOIS fiber sensing technology. Intelligent Transportation Infrastructure. 2026;5. doi:10.1093/iti/liag004
BibTeX
@article{Li2026,
author = {Li, Zheng and Xiao, Jieling and Yang, Xi and Cao, Jinyuan and Wang, Xiyun},
title = {Acoustic-vibration baseline for heavy-haul railways using DM-MFOIS fiber sensing technology},
journal = {Intelligent Transportation Infrastructure},
year = {2026},
volume = {5},
doi = {10.1093/iti/liag004}
}
EUVIMED