Ecological risk assessment of nickel leaching from ferronickel slag-containing concrete using species sensitivity distribution
Integrated Environmental Assessment and Management · 01.11.2026 · 22 (6) · 2072-2079
DOI: 10.1093/inteam/vjag096 ↗Kurz gefasst
Fachartikel in der Zeitschrift Integrated Environmental Assessment and Management, online erschienen am 05.06.2026. Verfasst von Yuki Takai und 2 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Marine Environmental Science, Faculty of Agriculture, Kyushu University, Fukuoka, Japan. Hauptthemen laut MEDLINE: Nickel, Construction Materials, Water Pollutants, Chemical, Environmental Monitoring. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Hyuga Smelting Co., Ltd.
Abstract (Originalsprache)
Ferronickel slag is a by-product generated during the production of raw materials for stainless steel. In recent years, it has attracted attention as a potential alternative to natural resources for use in infrastructure in marine environments; however, concerns remain regarding nickel release and its potential ecological implications. This study evaluated nickel leaching from ferronickel slag-containing concrete by combining species sensitivity distribution (SSD) analysis for marine organisms with leaching experiments. The SSD analysis, based on 10% effect concentration values, yielded a hazardous concentration for 5% of species of 6.09 µg/L for nickel. Concrete blocks (cylindrical shape; diameter, 10 cm; height, 20 cm; surface area, 0.0785 m2) were prepared with ferronickel slag, replacing natural fine aggregate at proportions ranging from 0% to 60%, and leaching tests were conducted using artificial seawater (35 practical salinity units). Nickel concentrations appeared to reach a plateau at higher replacement ratios (45% and 60%). In the current analysis, the SSD-derived 5% hazardous concentration was used under a conservative closed-system assumption, which represents a worst-case scenario for screening purposes. As such, the maximum allowable surface area of slag-containing concrete was estimated to range from 0.186 to 1.473 m2/L, suggesting that the potential for adverse ecological effects in marine environments is expected to be limited under conditions where dilution and dispersion occur. This integrated approach provides screening-level insight into the environmentally responsible utilization of ferronickel slag in marine applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Laboratory of Marine Environmental Science, Faculty of Agriculture, Kyushu University, Fukuoka, Japan.
- School of Earth and Ocean Sciences, National Oceanographic Centre Southampton, University of Southampton, Southampton, United Kingdom.
- Department of Biology and Environmental Sciences, School of Science and Technology, Sefako Makgatho Health Sciences University, Pretoria, South Africa.
ORCID-Profile: Yuki Takai
Förderung
- Hyuga Smelting Co., Ltd
Zitieren
APA
Takai, Y., Jones, A. M., & Lebepe, J. (2026). Ecological risk assessment of nickel leaching from ferronickel slag-containing concrete using species sensitivity distribution. Integrated Environmental Assessment and Management, 22(6), 2072-2079. https://doi.org/10.1093/inteam/vjag096
Vancouver
Takai Y, Jones AM, Lebepe J. Ecological risk assessment of nickel leaching from ferronickel slag-containing concrete using species sensitivity distribution. Integrated Environmental Assessment and Management. 2026;22(6):2072-2079. doi:10.1093/inteam/vjag096
BibTeX
@article{Takai2026,
author = {Takai, Yuki and Jones, Amber Marie and Lebepe, Jeffrey},
title = {Ecological risk assessment of nickel leaching from ferronickel slag-containing concrete using species sensitivity distribution},
journal = {Integrated Environmental Assessment and Management},
year = {2026},
volume = {22},
number = {6},
pages = {2072--2079},
doi = {10.1093/inteam/vjag096}
}
EUVIMED