Microplastics in an industrial zone wastewater treatment plant: Characterization, fate, and risk assessment
Integrated Environmental Assessment and Management · 01.07.2026 · 22 (4) · 1297-1308
DOI: 10.1093/inteam/vjag027 ↗Kurz gefasst
Fachartikel in der Zeitschrift Integrated Environmental Assessment and Management, online erschienen am 14.02.2026. Verfasst von Emine Büşra Çolakoğlu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Graduate School of Natural and Applied Sciences, Environmental Engineering Department, Erciyes University, Kayseri, Turkey. Hauptthemen laut MEDLINE: Microplastics, Water Pollutants, Chemical, Waste Disposal, Fluid. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Scientific and Technological Research Council of Turkey.
Abstract (Originalsprache)
The majority of research on microplastic (MP) characterization and removal has focused on municipal wastewater treatment plants (WWTPs). Hence, this study was performed at an industrial zone WWTP with sectors of textile, plastic recycling, furniture, etc. Three monthly sampling campaigns were conducted to analyze the MPs (abundance, shape, color, size, polymer type) and to investigate their fate and removal rate in the WWTP. Furthermore, the environmental risk assessment using EPI Suite modeling was conducted for common MP polymer types. The results indicated that the highest MP concentration was detected in the sludge sample (3,734 MP/L), whereas the lowest one was observed in the effluent sample (52 MP/L). Whereas large MPs (5 mm to 425 µm) were removed by primary treatment processes, smaller MPs (250 to 125 µm) showed a tendency for accumulation in the sludge. The most dominant MP shapes were fiber and fragment in both wastewater and sludge samples, whereas the most dominant polymer types were polypropylene (38%), polyethylene (24%), and polyethylene terephthalate (11%). The environmental risk assessment reveals that polyvinyl chloride, polyethylene terephthalate, and polystyrene, present in minimal quantities in this study, are more likely to impact the growth of living organisms significantly compared to more common polymer types like polypropylene and polyethylene. Although the overall MP removal efficiency of the industrial zone WWTP was 88%, a significant quantity of MPs (1.5 × 109 MP/day) was still discharged into the Kızılırmak river that is used mostly for irrigation. Effective control/reduction of MP discharge necessitates the implementation of tertiary treatment processes in industrial zone WWTPs to prevent soil pollution.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Graduate School of Natural and Applied Sciences, Environmental Engineering Department, Erciyes University, Kayseri, Turkey.
- Engineering Faculty, Environmental Engineering Department, Erciyes University, Kayseri, Turkey.
- Environmental Problems and Cleaner Production Research and Application Center, Erciyes University, Kayseri, Turkey.
- Engineering Faculty, Environmental Engineering Department, Istanbul University-Cerrahpasa, Istanbul, Turkey.
ORCID-Profile: Emine Büşra Çolakoğlu, İbrahim Uyanık, Hamdi Mıhçıokur, Adem Yurtsever
Förderung
- Scientific and Technological Research Council of Turkey
Zitieren
APA
Çolakoğlu, E. B., Uyanık, İ., Mıhçıokur, H., & Yurtsever, A. (2026). Microplastics in an industrial zone wastewater treatment plant: Characterization, fate, and risk assessment. Integrated Environmental Assessment and Management, 22(4), 1297-1308. https://doi.org/10.1093/inteam/vjag027
Vancouver
Çolakoğlu EB, Uyanık İ, Mıhçıokur H, Yurtsever A. Microplastics in an industrial zone wastewater treatment plant: Characterization, fate, and risk assessment. Integrated Environmental Assessment and Management. 2026;22(4):1297-1308. doi:10.1093/inteam/vjag027
BibTeX
@article{olakolu2026,
author = {Çolakoğlu, Emine Büşra and Uyanık, İbrahim and Mıhçıokur, Hamdi and Yurtsever, Adem},
title = {Microplastics in an industrial zone wastewater treatment plant: Characterization, fate, and risk assessment},
journal = {Integrated Environmental Assessment and Management},
year = {2026},
volume = {22},
number = {4},
pages = {1297--1308},
doi = {10.1093/inteam/vjag027}
}
EUVIMED