EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring the effects of accelerated carbonation synergy on fly ash cement-based materials

Sadaf Noshin, Sajjad Mubin, Wasim Abbass, Muhammad Abid, Rayed Alyousef, Hisham Alabduljabbar, Fahid Aslam

International Journal of Low-Carbon Technologies · 27.01.2026 · 21

DOI: 10.1093/ijlct/ctag158 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Low-Carbon Technologies, online erschienen am 14.11.2026. Verfasst von Sadaf Noshin und 6 weiteren Autor:innen. Die Arbeit nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Skłodowska-Curie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction sector is being pressured toward achieving carbon neutrality, which requires novel ways of carbon capture, utilization, and storage. Fly ash (FA) is often used as a substitute to lower the clinker factor but its low reactivity makes it difficult to be used in high-volume substitution. Carbonation curing is one of the promising methods to accelerate the strength development and to avoid CO2 emission, but synergistic effect between binder precarbonation and matrix curing is still not fully understood. This study proposes a dual carbonation process that entails sub-baric (0.5 bar) wet-treatment of raw binders (ordinary Portland cement and FA) and secondary carbonation curing of the hardened pastes. support vector regression (R2 = 0.9904) and SHapley Additive exPlanations analysis were coupled with microstructural characterization (X-ray diffraction, scanning electron microscopy) to decode nonlinear processing synergies. Results show that precarbonation creates nano-calcium carbonate nucleation seeds on the surface to accelerate the early hydration stages without compromising core hydraulic phases. However, a clear strength paradox appeared: optimum strength (18.4% strength gain for 10% low-carbon FA mixtures) was reached after moderate processing (0.5 h pretreatment, 3 h curing) while excessive processing (3 h pretreatment, 3 h curing) led to decalcification and microcracking of calcium silicate hydrate. This two-step sub-baric strategy provides a low-cost and scalable route for precast concrete producers to capture as much as 22.5 wt % CO2 and to maximize the use of industrial waste without the need of high-pressure autoclaves.

Förderung

  • the European Union’s Horizon 2020 Research and Innovation Programme through the Marie Skłodowska-Curie

Zitieren

APA

Noshin, S., Mubin, S., Abbass, W., Abid, M., Alyousef, R., Alabduljabbar, H., & Aslam, F. (2026). Exploring the effects of accelerated carbonation synergy on fly ash cement-based materials. International Journal of Low-Carbon Technologies, 21. https://doi.org/10.1093/ijlct/ctag158

Vancouver

Noshin S, Mubin S, Abbass W, Abid M, Alyousef R, Alabduljabbar H, et al. Exploring the effects of accelerated carbonation synergy on fly ash cement-based materials. International Journal of Low-Carbon Technologies. 2026;21. doi:10.1093/ijlct/ctag158

BibTeX
@article{Noshin2026,
  author = {Noshin, Sadaf and Mubin, Sajjad and Abbass, Wasim and Abid, Muhammad and Alyousef, Rayed and Alabduljabbar, Hisham and Aslam, Fahid},
  title = {Exploring the effects of accelerated carbonation synergy on fly ash cement-based materials},
  journal = {International Journal of Low-Carbon Technologies},
  year = {2026},
  volume = {21},
  doi = {10.1093/ijlct/ctag158}
}
Kostenlos starten →