EUVIMEDEUVIMED entdecken
Crossref

Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain

Alyssa M Hernandez iD, Perrin E Schiebel iD, Jennifer Shum iD, Robert J Wood iD

Integrative And Comparative Biology · 2024

DOI: 10.1093/icb/icae145 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Integrative And Comparative Biology, 2024. Verfasst von Alyssa M Hernandez und 3 weiteren Autor:innen. Beteiligte Einrichtung: John A. Paulson School of Engineering and Applied Sciences, Harvard University, Boston, MA 02134, USA. Hauptthemen laut MEDLINE: Locomotion, Robotics, Coleoptera, Extremities. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Museum of Comparative Zoology, Harvard University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Synopsis To navigate complex terrains, insects use diverse tarsal structures (adhesive pads, claws, spines) to reliably attach to and locomote across substrates. This includes surfaces of variable roughness and inclination, which often require reliable transitions from ambulatory to scansorial locomotion. Using bioinspired physical models as a means for comparative research, our study specifically focused on the diversity of tarsal spines, which facilitate locomotion via frictional engagement and shear force generation. For spine designs, we took inspiration from ground beetles (family: Carabidae), which is a largely terrestrial group known for their quick locomotion. Evaluating four different species, we found that the hind legs host linear rows of rigid spines along the entire tarsus. By taking morphometric measurements of the spines, we highlighted parameters of interest (e.g., spine angle and aspect ratio) in order to test their relationship to shear forces sustained during terrain interactions. We systematically evaluated these parameters using spines cut from stainless steel shim attached to a small acrylic sled loaded with various weights. The sled was placed on 3D-printed models of rough terrain, randomly generated using fractal Brownian motion, while a motorized pulley system applied force to the spines. A force sensor measured the reaction force on the terrain, recording shear force before failure occurred. Initial shear tests highlighted the importance of spine angle, with bioinspired anisotropic designs producing higher shear forces. Using these data, we placed the best (50° angle) and worst (90° angle) performing spines on the legs of our insect-scale ambulatory robot physical model. We then tested the robot on various surfaces at 0°, 10°, and 20° inclines, seeing similar success with the more bioinspired spines.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LocomotionRoboticsColeopteraExtremitiesAnimalsBiomechanical Phenomena

Autor:innen und Institutionen

  • John A. Paulson School of Engineering and Applied Sciences, Harvard University, Boston, MA 02134, USA.
  • Department of Mechanical and Industrial Engineering, Montana State University, Bozeman, MT 59717, USA.

ORCID-Profile: Alyssa M Hernandez, Perrin E Schiebel, Jennifer Shum, Robert J Wood

Förderung

  • Museum of Comparative Zoology, Harvard University

Zitieren

APA

Hernandez, A. M., Schiebel, P. E., Shum, J., & Wood, R. J. (2024). Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain. Integrative And Comparative Biology. https://doi.org/10.1093/icb/icae145

Vancouver

Hernandez AM, Schiebel PE, Shum J, Wood RJ. Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain. Integrative And Comparative Biology. 2024. doi:10.1093/icb/icae145

BibTeX
@article{Hernandez2024,
  author = {Hernandez, Alyssa M and Schiebel, Perrin E and Shum, Jennifer and Wood, Robert J},
  title = {Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain},
  journal = {Integrative And Comparative Biology},
  year = {2024},
  doi = {10.1093/icb/icae145}
}
Kostenlos starten →