EUVIMEDEUVIMED entdecken
Fallbericht

L26/P-152 A clinical pregnancy from microICSI: first case report in an ongoing prospective sibling oocyte non-inferiority study of a novel 3D-printed suction-free ICSI device

D.K. Gardner, K. Gurner, R. Kelley, C. Thomas, V.K. Hua, M. Kime, T. Daly, F. Agresta

Human Reproduction · 01.07.2026 · 41 (Supplement_1)

DOI: 10.1093/humrep/deag083.488 ↗

Kurz gefasst

Fallbericht in der Zeitschrift Human Reproduction, online erschienen am 08.07.2026. Verfasst von D.K. Gardner und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Study question Can a novel 3D-printed microICSI device, designed to reduce stress, support fertilisation, embryo development, and pregnancy outcomes comparable to standard ICSI in human IVF treatment? Summary answer A clinical pregnancy was achieved following insemination using the novel microICSI device (suction-free oocyte holding), supporting its feasibility as a gentler alternative to standard ICSI. What is known already The holding pipette has been a fundamental instrument for Intracytoplasmic Sperm Injection (ICSI) and was designed to apply suction to stabilise the oocyte, which can introduce mechanical distortion to the oocyte. microICSI is a novel 3D-printed device designed to support the oocyte without suction, and reduce the stress associated with the use of a conventional holding pipette. Preclinical studies have revealed that microICSI induces less distortion of the oocyte, and early clinical studies, including pilot data from Japan, suggest comparable or improved fertilisation outcomes; however, clinical evidence remains limited. Study design, size, duration This report describes a case outcome from an ongoing, multi-centre, prospective sibling oocyte noninferiority study, in which oocytes retrieved from a single IVF cycle are randomly allocated to microICSI or standard ICSI. Recruitment and follow-up are ongoing. Participants/materials, setting, methods A female patient aged 35 years undergoing routine IVF treatment and consented to participate. Following oocyte retrieval, sibling oocytes were randomly assigned to insemination using either standard ICSI or the microICSI device. Embryo culture, grading, and selection for transfer were performed according to standard laboratory protocols, with embryologists and clinicians blinded to insemination method at the time of embryo selection. A single blastocyst was transferred fresh on day 5. Main results and the role of chance The transferred blastocyst, derived from an oocyte inseminated using microICSI, developed to a 5BA blastocyst and resulted in a confirmed clinical pregnancy in a patient with a history of five prior unsuccessful IVF cycles. The pregnancy is ongoing. Two additional blastocysts (5AB and 5BB) from microICSI were also formed and vitrified. In contrast, no usable blastocysts developed from the sibling oocytes inseminated using standard ICSI. As this is a single case report within a larger noninferiority study, no statistical conclusions can be drawn, and the contribution of chance cannot be excluded. Limitations, reasons for caution This abstract reports a single pregnancy outcome and does not allow conclusions regarding comparative efficacy, safety, or noninferiority. No live birth data are yet available. Results should be interpreted cautiously until completion of the full study with adequate sample size and statistical analysis. Wider implications of the findings This case supports the feasibility of microICSI as a suction-free alternative to standard ICSI and provides reassurance regarding embryo development and pregnancy potential. If confirmed in larger studies, microICSI could offer a gentler and more standardised approach to oocyte handling during ICSI, with potential benefits for laboratory workflow and outcomes. Trial registration number Yes

Zitieren

APA

Gardner, D., Gurner, K., Kelley, R., Thomas, C., Hua, V., Kime, M., Daly, T., & Agresta, F. (2026). L26/P-152 A clinical pregnancy from microICSI: first case report in an ongoing prospective sibling oocyte non-inferiority study of a novel 3D-printed suction-free ICSI device. Human Reproduction, 41(Supplement_1). https://doi.org/10.1093/humrep/deag083.488

Vancouver

Gardner D, Gurner K, Kelley R, Thomas C, Hua V, Kime M, et al. L26/P-152 A clinical pregnancy from microICSI: first case report in an ongoing prospective sibling oocyte non-inferiority study of a novel 3D-printed suction-free ICSI device. Human Reproduction. 2026;41(Supplement_1). doi:10.1093/humrep/deag083.488

BibTeX
@article{Gardner2026,
  author = {Gardner, D.K. and Gurner, K. and Kelley, R. and Thomas, C. and Hua, V.K. and Kime, M. and Daly, T. and Agresta, F.},
  title = {L26/P-152 A clinical pregnancy from microICSI: first case report in an ongoing prospective sibling oocyte non-inferiority study of a novel 3D-printed suction-free ICSI device},
  journal = {Human Reproduction},
  year = {2026},
  volume = {41},
  number = {Supplement_1},
  doi = {10.1093/humrep/deag083.488}
}
Kostenlos starten →