Comparing linear and nonlinear finite element models of vertebral strength across the thoracolumbar spine: a benchmark from density-calibrated computed tomography
GigaScience · 2025
DOI: 10.1093/gigascience/giaf094 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift GigaScience, 2025. Verfasst von Matthias Walle und 2 weiteren Autor:innen. Beteiligte Einrichtung: McCaig Institute for Bone and Joint Health, University of Calgary, Calgary, AB, T2N 4Z6, Canada. Hauptthemen laut MEDLINE: Lumbar Vertebrae, Thoracic Vertebrae, Tomography, X-Ray Computed. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Alberta Spine Foundation, A-Medico grant.
Abstract (Originalsprache)
Background
Opportunistic assessment of vertebral strength from clinical computed tomography (CT) scans holds substantial promise for fracture risk stratification, yet variability in calibration methods and finite element (FE) modeling approaches has led to limited comparability across studies. In this work, we provide a publicly available benchmark dataset that supports standardized biomechanical analysis of the thoracic and lumbar spine using density-calibrated CT data. We extended the VerSe 2019 dataset to include phantomless quantitative CT calibration, automated vertebral substructure segmentation, and vertebral strength estimates derived from both linear and nonlinear FE models. The cohort comprises 141 patients scanned across 5 CT systems, including contrast-enhanced protocols.
Results
Phantomless calibration was performed using automatically segmented tissue references and validated against synchronous calibration phantoms in 17 scans. To evaluate model performance, we implemented a nonlinear elastoplastic FE model and compared it to 2 linear estimates. A displacement-calibrated linear model (0.2% axial strain) demonstrated excellent agreement with nonlinear failure loads (R = 0.96; mean difference = –0.07 kN), while a stiffness-based approach showed similarly strong correlation (R = 0.92). We evaluated vertebral strength at all thoracic and lumbar levels, enabling level-wise normalization and comparison. Strength ratios revealed consistent anatomical trends and identified T12 and T9 as reliable alternatives to L1 for opportunistic screening and model standardization.
Conclusions
All calibrated scans, segmentations, software, and modeling outputs are publicly released, providing a benchmark resource for validation and development of FE models, radiomics tools, and other quantitative imaging applications in musculoskeletal research.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- McCaig Institute for Bone and Joint Health, University of Calgary, Calgary, AB, T2N 4Z6, Canada.
- Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.
- Department of Radiology, University of Calgary, Calgary, AB T2N 1N4, Canada.
ORCID-Profile: Matthias Walle, Bryn E Matheson, Steven K Boyd
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Alberta Spine Foundation
- A-Medico grant
Zitieren
APA
Walle, M., Matheson, B. E., & Boyd, S. K. (2025). Comparing linear and nonlinear finite element models of vertebral strength across the thoracolumbar spine: a benchmark from density-calibrated computed tomography. GigaScience. https://doi.org/10.1093/gigascience/giaf094
Vancouver
Walle M, Matheson BE, Boyd SK. Comparing linear and nonlinear finite element models of vertebral strength across the thoracolumbar spine: a benchmark from density-calibrated computed tomography. GigaScience. 2025. doi:10.1093/gigascience/giaf094
BibTeX
@article{Walle2025,
author = {Walle, Matthias and Matheson, Bryn E and Boyd, Steven K},
title = {Comparing linear and nonlinear finite element models of vertebral strength across the thoracolumbar spine: a benchmark from density-calibrated computed tomography},
journal = {GigaScience},
year = {2025},
doi = {10.1093/gigascience/giaf094}
}
EUVIMED