Microfiber emissions from textile manufacturing industries: A critical review
Environmental Toxicology and Chemistry · 21.07.2026
DOI: 10.1093/etojnl/vgag200 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Toxicology and Chemistry, online erschienen am 21.07.2026. Verfasst von Ishrat J Badruddin und 4 weiteren Autor:innen. Beteiligte Einrichtung: Leeds Institute of Textiles and Colour, School of Design, University of Leeds, Leeds, LS2 9JT, UK. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: IMPACT + and Back to Baselines in Circular Fashion and Textiles, UKRI Circular Fashion and Textile Network Plus: A collaboration, Natural Environment Research Council.
Abstract (Originalsprache)
Microfiber (MF) emissions from all types of textiles, natural, synthetic and semisynthetic, are not well studied, with most articles identifying domestic washing as the major cause of MF leakage; however, this ignores large-scale MF shedding during manufacturing. In the last 5 years, only 10 articles have focused on MF release during textile manufacturing, highlighting gaps in knowledge. A review of the available literature demonstrated manufacturing as an important but underappreciated source of MF pollution and a potential opportunity for mitigation. Varying methods of analysis, levels of replication, and different data reporting norms pose difficulty in gaining a holistic overview of the data available. The need for more stringent research into this area is evident to fully map MF emissions throughout the supply chain and to ensure adequate process design and remediation methodologies. On average, wet processing releases two times more MFs (∼1,300 MF g-1 fabric) than dry processing (∼700 MF g-1), whereas dyeing (∼800 MF g-1) releases most MFs. Wet processes also release two times more MF mass compared with dry processes, and MF length in wet processing is 57% shorter compared with dry processing. Wastewater treatment plant capture efficiency for MFs depends on MF size in the influent, which in turn depends on the type of fibers used in production, the manufacturing processes, and material characteristics. Scalable “better-by-design” interventions offer a significant opportunity to reduce MF emissions in production, including selecting yarns with higher twist and packing density, laser cut fabrics, pretreatment of textiles using plasma treatment, low temperature dope dyeing and in situ dyeing methods with reduced abrasion, and prewashing textiles before sending to the consumer to reduce MF emissions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Leeds Institute of Textiles and Colour, School of Design, University of Leeds, Leeds, LS2 9JT, UK.
- Department of Biosciences, Faculty of Health and Life Sciences, University of Exeter, EX4 4QD, UK.
- School of Geography, University of Leeds, Leeds, LS2 9JT UK.
Förderung
- IMPACT + and Back to Baselines in Circular Fashion and Textiles
- UKRI Circular Fashion and Textile Network Plus: A collaboration
- Natural Environment Research Council
Zitieren
APA
Badruddin, I. J., Houghton, J. A., Parker, B., Kay, P., & Blackburn, R. S. (2026). Microfiber emissions from textile manufacturing industries: A critical review. Environmental Toxicology and Chemistry. https://doi.org/10.1093/etojnl/vgag200
Vancouver
Badruddin IJ, Houghton JA, Parker B, Kay P, Blackburn RS. Microfiber emissions from textile manufacturing industries: A critical review. Environmental Toxicology and Chemistry. 2026. doi:10.1093/etojnl/vgag200
BibTeX
@article{Badruddin2026,
author = {Badruddin, Ishrat J and Houghton, Joseph A and Parker, Ben and Kay, Paul and Blackburn, Richard S},
title = {Microfiber emissions from textile manufacturing industries: A critical review},
journal = {Environmental Toxicology and Chemistry},
year = {2026},
doi = {10.1093/etojnl/vgag200}
}
EUVIMED