Finite control set model predictive control of three-port converter for interfacing a PV–battery energy storage system to a three-phase stand-alone AC system
Clean Energy · 01.04.2024 · 8 (2) · 73-84
DOI: 10.1093/ce/zkae006 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clean Energy, online erschienen am 02.03.2024. Verfasst von Gangashetty A Preeti und 1 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This paper proposes a multiport bidirectional non-isolated converter topology that provides advantages in terms of simultaneous multiple operations, single-stage conversion, high power density and reduced power losses due to the lower number of switches. The proposed multiport converter uses a centralized non-linear controller known as a finite control set model predictive controller to manage the flow of power between different ports. It deals with the parallel operation of photovoltaic and battery energy storage systems for stand-alone alternating current (AC) systems. The converter connects the lower voltage battery to the photovoltaic port using a bidirectional buck/boost converter and the photovoltaic port is linked to the stand-alone AC load through a three-phase full-bridge inverter. Each leg of the three-phase converter will act as a bidirectional direct current (DC)/DC converter as well as an inverter simultaneously. Only six switches manage the power transfer between all the connected ports of photovoltaic–battery energy storage system linked to the stand-alone AC load. The proposed multiport converter is mathematically modelled and controlled by a finite control set model predictive controller. The system is validated in simulation (1-kW rating) and experimental environment (200-W rating). The hardware prototype is developed in the laboratory and the controller is implemented on the field-programmable gate array board. Two independent case studies are carried out to validate the efficacy of the system. The first scenario is for a change in solar irradiance, while the second scenario is for a change in the output load.
Zitieren
APA
Preeti, G. A., & Karthikeyan, A. (2024). Finite control set model predictive control of three-port converter for interfacing a PV–battery energy storage system to a three-phase stand-alone AC system. Clean Energy, 8(2), 73-84. https://doi.org/10.1093/ce/zkae006
Vancouver
Preeti GA, Karthikeyan A. Finite control set model predictive control of three-port converter for interfacing a PV–battery energy storage system to a three-phase stand-alone AC system. Clean Energy. 2024;8(2):73-84. doi:10.1093/ce/zkae006
BibTeX
@article{Preeti2024,
author = {Preeti, Gangashetty A and Karthikeyan, Anbalagan},
title = {Finite control set model predictive control of three-port converter for interfacing a PV–battery energy storage system to a three-phase stand-alone AC system},
journal = {Clean Energy},
year = {2024},
volume = {8},
number = {2},
pages = {73--84},
doi = {10.1093/ce/zkae006}
}
EUVIMED