High-temperature creep behaviour and related interfacial phase transformation of titanium/steel clad plates
Composite Design and Manufacturing · 02.06.2026 · 2 (2)
DOI: 10.1093/cdm/wqag013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Composite Design and Manufacturing, online erschienen am 02.06.2026. Verfasst von Tingyu Wang und 6 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major program of national natural science foundation of China.
Abstract (Originalsprache)
Objectives
Titanium/steel clad plates are primarily used in condensers in the nuclear energy sector, where they endure high-temperature and high-pressure conditions during service. However, the high-temperature creep mechanisms of titanium/steel clad plates are not yet adequately understood.
Methods
To address this issue, uniaxial tensile creep tests were conducted on TC4/304 clad plates at a temperature of 500°C during this study. Results and Conclusion The results indicate that, as the stress increased from 300 MPa to 500 MPa, the steady-state creep rates of the specimens rose accordingly and that the stress exponent reached a value of 14.04. This result suggests that the creep behaviour in this regime was primarily controlled by dislocation creep mechanisms. Significant deformation-induced martensitic transformation occurred in the 304 stainless-steel matrix. The austenite content increased with the applied stress, while the martensite content, which was governed by the time-dependent cumulative effects of the creep, exhibited the opposite trend. Moreover, a notable stress–time coupling effect was observed; elemental migration occurred more extensively under prolonged low-stress conditions, and various interfacial phases, such as FeCr, TiV, FeNi, and Ti2Ni, were formed.
Förderung
- Major program of national natural science foundation of China
Zitieren
APA
Wang, T., Ren, Z., Wen, W., Guo, G., Liu, W., Hou, J., & Ji, J. (2026). High-temperature creep behaviour and related interfacial phase transformation of titanium/steel clad plates. Composite Design and Manufacturing, 2(2). https://doi.org/10.1093/cdm/wqag013
Vancouver
Wang T, Ren Z, Wen W, Guo G, Liu W, Hou J, et al. High-temperature creep behaviour and related interfacial phase transformation of titanium/steel clad plates. Composite Design and Manufacturing. 2026;2(2). doi:10.1093/cdm/wqag013
BibTeX
@article{Wang2026,
author = {Wang, Tingyu and Ren, Zhongkai and Wen, Wei and Guo, GuoShuangshuang and Liu, Wenwen and Hou, Jinxiong and Ji, Jiang},
title = {High-temperature creep behaviour and related interfacial phase transformation of titanium/steel clad plates},
journal = {Composite Design and Manufacturing},
year = {2026},
volume = {2},
number = {2},
doi = {10.1093/cdm/wqag013}
}
EUVIMED