EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fixture-assisted vibration low-pressure curing: an approach for solidification and molding of honeycomb sandwich structures

Ruitong Yu, Lihua Zhan, Bolin Ma, Miaomiao Zhang, Zheng Cao

Composite Design and Manufacturing · 14.04.2026 · 2 (1)

DOI: 10.1093/cdm/wqag011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composite Design and Manufacturing, online erschienen am 25.05.2026. Verfasst von Ruitong Yu und 4 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Science and Technology Innovation Program of Hunan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

The influence of rigid fixtures on the molding quality of honeycomb sandwich structures under vibration low-pressure curing is investigated.

Methods

Honeycomb sandwich panels were fabricated with and without fixtures under vibration accelerations of 5, 10, and 15 g. The effects on face sheet quality, porosity, interlaminar shear strength (ILSS), and dimensional deformation were systematically evaluated and compared with autoclave molding.

Results

Fixtures applied at 10 g vibration acceleration reduced face sheet porosity by 29.4%, increased ILSS by 14.5%, and significantly improved face sheet flatness relative to vibration curing without fixtures. The obtained performance was comparable to that of a 0.2 MPa autoclave curing process.

Conclusion

Fixture-assisted vibration low-pressure curing is demonstrated as an effective approach for energy-efficient and high-quality molding of honeycomb sandwich structures.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Science and Technology Innovation Program of Hunan Province
  • AECC Nanjing Dongli Co., Ltd

Zitieren

APA

Yu, R., Zhan, L., Ma, B., Zhang, M., & Cao, Z. (2026). Fixture-assisted vibration low-pressure curing: an approach for solidification and molding of honeycomb sandwich structures. Composite Design and Manufacturing, 2(1). https://doi.org/10.1093/cdm/wqag011

Vancouver

Yu R, Zhan L, Ma B, Zhang M, Cao Z. Fixture-assisted vibration low-pressure curing: an approach for solidification and molding of honeycomb sandwich structures. Composite Design and Manufacturing. 2026;2(1). doi:10.1093/cdm/wqag011

BibTeX
@article{Yu2026,
  author = {Yu, Ruitong and Zhan, Lihua and Ma, Bolin and Zhang, Miaomiao and Cao, Zheng},
  title = {Fixture-assisted vibration low-pressure curing: an approach for solidification and molding of honeycomb sandwich structures},
  journal = {Composite Design and Manufacturing},
  year = {2026},
  volume = {2},
  number = {1},
  doi = {10.1093/cdm/wqag011}
}
Kostenlos starten →