EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Layerwise comparison of the coupled evolution of pores and microstructure in coaxial wire-laser DED of 205C/7075 aluminum alloy: Numerical simulation and experiment

Zhuanni Gao, Kaiyu Zhang, Xing Liu, Xiang Li, Zhangping Hu, Leilei Wang, Xiaohong Zhan

Composite Design and Manufacturing · 2025

DOI: 10.1093/cdm/wqaf015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Zhuanni Gao und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synergistic distribution characteristics of microstructures and pores in different deposition layers exhibit significant variations in the coaxial wire-laser directed energy deposition (DED) of heterogeneous aluminum alloys due to differences in material properties and thermal distribution. A macro-micro coupled model for grain growth and pore evolution was established to describe the molten pool solidification process in the coaxial wire-laser DED of 205C/7075 aluminum alloys in this study. The temperature field distribution, solidification parameters, pore distribution, microstructure, and the coupled evolution behavior of grains and pores in different deposition layers were investigated. This study reveals that the sizes of columnar and equiaxed grains, as well as the degrees of solute and hydrogen accumulation are greater in the deposition layers of the 7075 aluminum alloy than in those of the 205C aluminum alloy, whereas the molten pool length exhibits the opposite trend. The average grain size in the pore-adjacent region increases from 84.06 μm to 138.91 μm from the transition layer C2 to the top deposition layer B of the 7075 aluminum alloy. The porosity and average pore diameter are higher in the transition layer C2 than in the top deposition layer B of the 7075 aluminum alloy. The solute and hydrogen accumulation are greater in the bottom deposition layer A than in the transition layer C1 of the 205C aluminum alloy. This study provides a theoretical basis for the synergistic regulation of microstructure and porosity in the coaxial wire-laser DED of heterogeneous aluminum alloys.

Zitieren

APA

Gao, Z., Zhang, K., Liu, X., Li, X., Hu, Z., Wang, L., & Zhan, X. (2025). Layerwise comparison of the coupled evolution of pores and microstructure in coaxial wire-laser DED of 205C/7075 aluminum alloy: Numerical simulation and experiment. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf015

Vancouver

Gao Z, Zhang K, Liu X, Li X, Hu Z, Wang L, et al. Layerwise comparison of the coupled evolution of pores and microstructure in coaxial wire-laser DED of 205C/7075 aluminum alloy: Numerical simulation and experiment. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf015

BibTeX
@article{Gao2025,
  author = {Gao, Zhuanni and Zhang, Kaiyu and Liu, Xing and Li, Xiang and Hu, Zhangping and Wang, Leilei and Zhan, Xiaohong},
  title = {Layerwise comparison of the coupled evolution of pores and microstructure in coaxial wire-laser DED of 205C/7075 aluminum alloy: Numerical simulation and experiment},
  journal = {Composite Design and Manufacturing},
  year = {2025},
  doi = {10.1093/cdm/wqaf015}
}
Kostenlos starten →