EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-point flexible forming of composite fan blades: a novel data-driven surface compensation method for controlling process-induced deformation

Deyu Yue, Yuan Li, Xianhe Cheng, Wenliang Wang, Hexuan Shi, Rundong Ding, Junwei Sun, Qigang Han

Composite Design and Manufacturing · 2025

DOI: 10.1093/cdm/wqaf014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Deyu Yue und 7 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Inherent process-induced deformation (PID) compromises the surface accuracy of complex-shaped composite fan blades (CFBs) with variable cross-sections. Conventional methods of iteratively modifying rigid die surfaces are time-intensive and costly, limiting manufacturing efficiency. This study aims to develop a novel data-driven surface compensation method to mitigate PID in CFBs.

Methods

A multi-point flexible die (MPFD) closed-loop digital control system was developed to adaptively adjust the die surface, achieving precise reconstruction. Additionally, an experiment-guided neural network approach, based on an improved sparrow search algorithm and back propagation neural network, was introduced for feature point cloud prediction. Using small-sample point cloud data, a deviation compensation model was created and validated through manufacturing experiments on a double-diaphragm flexible platform.

Results

The MPFD system maintained surface errors between −0.071 and 0.054 mm. For initial manufactured blades, root mean square deviations were 0.971 mm at the tip, 3.015 mm at the middle, and 1.689 mm at the root. After compensation, these deviations reduced to 0.252, 0.347, and 0.281 mm, respectively, representing improvements of 74.05%, 90.68%, and 83.36%. Over 93% of deviations fell within ±0.5 mm.

Conclusion

The proposed data-driven method effectively controls non-uniform PID, providing an efficient solution for high-precision manufacturing of complex composite components. Future work will focus on optimizing algorithm parameters to further enhance accuracy.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yue, D., Li, Y., Cheng, X., Wang, W., Shi, H., Ding, R., Sun, J., & Han, Q. (2025). Multi-point flexible forming of composite fan blades: a novel data-driven surface compensation method for controlling process-induced deformation. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf014

Vancouver

Yue D, Li Y, Cheng X, Wang W, Shi H, Ding R, et al. Multi-point flexible forming of composite fan blades: a novel data-driven surface compensation method for controlling process-induced deformation. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf014

BibTeX
@article{Yue2025,
  author = {Yue, Deyu and Li, Yuan and Cheng, Xianhe and Wang, Wenliang and Shi, Hexuan and Ding, Rundong and Sun, Junwei and Han, Qigang},
  title = {Multi-point flexible forming of composite fan blades: a novel data-driven surface compensation method for controlling process-induced deformation},
  journal = {Composite Design and Manufacturing},
  year = {2025},
  doi = {10.1093/cdm/wqaf014}
}
Kostenlos starten →