EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hot deformation behaviour and microstructure evolution of ultra-fine grained carbon nanotube/2024Al matrix composite

Jun Yan, Cunsheng Zhang, Zhenyu Liu, Yingzhi Li

Composite Design and Manufacturing · 2025

DOI: 10.1093/cdm/wqaf010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Jun Yan und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

The influence of reinforcements on the hot deformation behaviour of carbon nanotube (CNT)-reinforced 2024Al composite is investigated in this work.

Methods

The CNT-reinforced 2024Al composite was fabricated by ball milling and sintering. The fabricated CNT/2024Al composite was compressed at 350–500°C and 0.001–1 s−1.

Results

The composite exhibits the highest flow stress at 350°C/1 s−1, and the lowest stress at 500°C/0.001 s−1. Because of the addition of reinforcements in composites, the conventional Arrhenius equation yields relatively large errors in stress prediction. By introducing a correction factor, the modified Arrhenius model demonstrates improved accuracy in predicting stress. Processing maps reveal that the region of highest η is observed within the 350–400°C and 0.1–1 s−1. Conversely, lower efficiency coincides with the instability region at 400–500°C and 0.01–0.001 s−1. The composite deformed at 350°C/1 s−1 exhibits a fine and uniform grain size, while the microstructure of the composite deformed at 500°C/0.001 s−1 exhibits a bigger grain size.

Conclusion

The reinforcements distributed at grain boundaries play a pinning role on boundary migration, thereby suppressing grain growth within the composite. Moreover, the reinforcements enhance the deformation stress and energy required for microstructure evolution, resulting in an increase in deformation activation energy.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yan, J., Zhang, C., Liu, Z., & Li, Y. (2025). Hot deformation behaviour and microstructure evolution of ultra-fine grained carbon nanotube/2024Al matrix composite. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf010

Vancouver

Yan J, Zhang C, Liu Z, Li Y. Hot deformation behaviour and microstructure evolution of ultra-fine grained carbon nanotube/2024Al matrix composite. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf010

BibTeX
@article{Yan2025,
  author = {Yan, Jun and Zhang, Cunsheng and Liu, Zhenyu and Li, Yingzhi},
  title = {Hot deformation behaviour and microstructure evolution of ultra-fine grained carbon nanotube/2024Al matrix composite},
  journal = {Composite Design and Manufacturing},
  year = {2025},
  doi = {10.1093/cdm/wqaf010}
}
Kostenlos starten →