EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of ultrasonic surface rolling process on the surface integrity of A100 ultra-high-strength steel

Hailan Shi, Daoxin Liu, Xiaohua Zhang, Xingyuan Wang

Composite Design and Manufacturing · 2025

DOI: 10.1093/cdm/wqaf009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Hailan Shi und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the influence of multi-pass ultrasonic surface rolling processing (USRP) on the surface integrity of a hard-to-deform metal—A100 steel. Compared with the as-received A100 substrate, 15 USRP passes markedly reduced the surface roughness. The sharp decrease mainly stemmed from the cemented-carbide sphere’s rapid collision, triggering a swift shear instability in a notably slender zone of contact. The peaks of the machining grooves underwent localized melting and plastic side-flow, while the valleys were levelled by high-energy dislocation glide and grain rotation; simultaneously, a micro-forging effect forced secondary micro-cutting debris into the groove bottoms, producing a mirror-like finish. This intense deformation accumulated a 94-µm thick severe plastic flow layer at the surface, where grains were heavily fragmented and the dislocation density increased significantly. The resulting volumetric expansion, constrained by the underlying material, generated a residual stress of −1.3 GPa. With increasing depth, the stress-wave amplitude decayed exponentially, the plastic-strain gradient diminished, and the dislocation multiplication–annihilation process approached equilibrium. Consequently, the microhardness rose continuously from 653 HK in the bulk to 812 HK at the surface, establishing a 200 µm gradient-hardened layer and a 350 µm compressive residual-stress layer. This synergistic ‘plastic flow–gradient hardening–residual stress’ barrier effectively suppressed fatigue-crack initiation and hindered abrasive wear, leading to a significant improvement in the material’s wear and fatigue performance.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Shi, H., Liu, D., Zhang, X., & Wang, X. (2025). Effect of ultrasonic surface rolling process on the surface integrity of A100 ultra-high-strength steel. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf009

Vancouver

Shi H, Liu D, Zhang X, Wang X. Effect of ultrasonic surface rolling process on the surface integrity of A100 ultra-high-strength steel. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf009

BibTeX
@article{Shi2025,
  author = {Shi, Hailan and Liu, Daoxin and Zhang, Xiaohua and Wang, Xingyuan},
  title = {Effect of ultrasonic surface rolling process on the surface integrity of A100 ultra-high-strength steel},
  journal = {Composite Design and Manufacturing},
  year = {2025},
  doi = {10.1093/cdm/wqaf009}
}
Kostenlos starten →