Microstructural evolution and wear performance of Mn8/SS400 composites under different heat treatment strategies
Composite Design and Manufacturing · 2025
DOI: 10.1093/cdm/wqaf002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Composite Design and Manufacturing, 2025. Verfasst von Shengnan Yuan und 5 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Development Center.
Abstract (Originalsprache)
Objectives
This study systematically investigates the effects of various heat treatment processes including direct quenching (DQ), quenching plus tempering (QT), and direct annealing (DA) on the wear resistance of Mn8/SS400 composites fabricated via hot roll bonding.
Methods
Layer-specific heat treatments were applied to Mn8/SS400 composites, resulting in gradient-layered structures in QT samples and homogeneous multiphase matrices in DA samples, while maintaining the structural integrity of the SS400 substrate. Comprehensive microstructural analyses, microhardness profiling, and tribological testing were conducted to establish the correlation between heat treatment parameters, microstructural evolution, and wear performance.
Results
The results reveal that DQ led to the formation of a hard but brittle martensitic surface, resulting in poor wear resistance due to crack initiation and delamination. QT treatments refined the microstructure into a gradient-layered configuration with tempered martensite, austenitic transition, and multiphase matrix, significantly enhancing the balance between hardness and toughness. DA produced a homogeneous multiphase structure that exhibited the best wear resistance, attributed to the synergistic effect of pearlite, ferrite, and retained austenite (RA) phases. Among all conditions, the DA-treated samples showed the lowest specific wear rates and superior mechanical stability under varying loads.
Conclusion
This work highlights the importance of microstructural gradient design and phase synergy in tailoring the wear behaviour of layered steel composites through heat treatment.
Förderung
- Development Center
Zitieren
APA
Yuan, S., Xie, H., Ren, M., Lin, F., Zhu, L., & Jiang, Z. (2025). Microstructural evolution and wear performance of Mn8/SS400 composites under different heat treatment strategies. Composite Design and Manufacturing. https://doi.org/10.1093/cdm/wqaf002
Vancouver
Yuan S, Xie H, Ren M, Lin F, Zhu L, Jiang Z. Microstructural evolution and wear performance of Mn8/SS400 composites under different heat treatment strategies. Composite Design and Manufacturing. 2025. doi:10.1093/cdm/wqaf002
BibTeX
@article{Yuan2025,
author = {Yuan, Shengnan and Xie, Haibo and Ren, Mengyuan and Lin, Fei and Zhu, Lisong and Jiang, Zhengyi},
title = {Microstructural evolution and wear performance of Mn8/SS400 composites under different heat treatment strategies},
journal = {Composite Design and Manufacturing},
year = {2025},
doi = {10.1093/cdm/wqaf002}
}
EUVIMED