EUVIMEDEUVIMED entdecken
Crossref

Nanoarchitectonics of hierarchically porous carbon materials from Areca catechu nut for electrical double-layer capacitor applications

Sabina Shahi, Rabindra Nath Acharyya, Aabha Puri, Sarita Manandhar, Gokulnath Subramaniam, Marappan Sathish, Katsuhiko Ariga, Lok Kumar Shrestha

Bulletin of the Chemical Society of Japan · 29.05.2026 · 99 (6)

DOI: 10.1093/bulcsj/uoag073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of the Chemical Society of Japan, online erschienen am 30.05.2026. Verfasst von Sabina Shahi und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise tailoring of the surface texture and composition of porous carbon materials is crucial for enhancing the energy storage performance of the supercapacitors. Here, we report the fabrication of high-surface-area, self-nitrogen-oxygen-doped porous carbon materials from the sustainable carbon source, Areca catechu nut, by controlling the carbonization temperature (800 to 1000 °C) using alkali (KOH) as an activator in an inert nitrogen atmosphere. The material characterizations revealed ultra-high surface area of the carbon materials (2,337 m2 g−1), with hierarchical micro- and mesoporosity and heteroatom retention (N, O). Activation significantly enhanced the surface textural properties, increasing the specific surface area and pore volumes from 57 to 2,337 m2 g−1 and from 0.14 to 2.59 cm3 g−1, respectively. The electrochemical performance of the prepared carbon materials was then studied in a 3-electrode cell configuration in an aqueous electrolyte (1 M H2SO4). The optimal sample, ANC_K1000, achieved a very high gravimetric capacitance of 410 F g−1 at a current density of 1 A g−1. The symmetric supercapacitor cell constructed with the optimal material delivered a decent energy density of 10.3 Wh kg−1 at the power density of 600 W kg−1, coupled with a capacity retention of 90.6% after 10,000 charge-discharge cycles. These results demonstrate a simple, facile, and sustainable method for fabricating biomass-derived porous carbon materials from A. catechu nuts, which show immense potential as electrode materials for efficient energy storage in supercapacitors.

Förderung

  • Japan Society for the Promotion of Science

Zitieren

APA

Shahi, S., Acharyya, R. N., Puri, A., Manandhar, S., Subramaniam, G., Sathish, M., Ariga, K., & Shrestha, L. K. (2026). Nanoarchitectonics of hierarchically porous carbon materials from Areca catechu nut for electrical double-layer capacitor applications. Bulletin of the Chemical Society of Japan, 99(6). https://doi.org/10.1093/bulcsj/uoag073

Vancouver

Shahi S, Acharyya RN, Puri A, Manandhar S, Subramaniam G, Sathish M, et al. Nanoarchitectonics of hierarchically porous carbon materials from Areca catechu nut for electrical double-layer capacitor applications. Bulletin of the Chemical Society of Japan. 2026;99(6). doi:10.1093/bulcsj/uoag073

BibTeX
@article{Shahi2026,
  author = {Shahi, Sabina and Acharyya, Rabindra Nath and Puri, Aabha and Manandhar, Sarita and Subramaniam, Gokulnath and Sathish, Marappan and Ariga, Katsuhiko and Shrestha, Lok Kumar},
  title = {Nanoarchitectonics of hierarchically porous carbon materials from Areca catechu nut for electrical double-layer capacitor applications},
  journal = {Bulletin of the Chemical Society of Japan},
  year = {2026},
  volume = {99},
  number = {6},
  doi = {10.1093/bulcsj/uoag073}
}
Kostenlos starten →