TPT 7.17 Standardising Docking Time in Robotic General Surgery: A Closed-Loop Audit Using Phase-Based Workflow Analysis
British Journal of Surgery · 05.08.2026 · 113 (Supplement_8)
DOI: 10.1093/bjs/znag087.256 ↗Kurz gefasst
Fachartikel in der Zeitschrift British Journal of Surgery, online erschienen am 05.08.2026. Verfasst von Nischal Khanal und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Aims
To standardise docking time in robotic general surgery by implementing a structured, phase-based workflow analysis, enabling reproducible benchmarking and identification of workflow inefficiencies.
Methods
A closed-loop audit was conducted across two cycles in a robotic general surgery programme. Cycle 1 (n=43) measured docking time from knife-to-skin until the surgeon sat at the console. Procedures included cholecystectomies (n=9), inguinal hernia repairs (n=14), and major colorectal resections (n=17). Cycle 2 (n=30) introduced a phase-based approach, dividing docking into five sequential steps: (1) knife-to-port placement, (2) drive-in, (3) drive-in to dock, (4) dock-to-target, and (5) target-to-console. Times were prospectively recorded and analysed to identify workflow delays, procedure-specific variation, and learning curve effects.
Results
Mean docking time decreased from 34 minutes in Cycle 1 to 32 minutes in Cycle 2. Inguinal hernia docking improved from ∼28 to 20 minutes, and major resections from 58 to 42 minutes. Cholecystectomy times increased slightly due to a small sample size and the inclusion of a new surgeon. Phase-based timing allowed precise identification of workflow bottlenecks and facilitated targeted optimisation. The structured approach enabled consistent benchmarking and assessment of team performance across different procedures.
Conclusions
Breaking down robotic docking into discrete, quantifiable stages provides a consistent way to standardise docking time and pinpoint inefficiencies in the workflow. The use of phase-based docking as a tool to understand the surgical team’s workflow is thus a strong, widely applicable method to not only enhance operative workflows but also to set up significant performance metrics in robotic general surgery.
Zitieren
APA
Khanal, N., Kathayat, L., & Aryal, K. (2026). TPT 7.17 Standardising Docking Time in Robotic General Surgery: A Closed-Loop Audit Using Phase-Based Workflow Analysis. British Journal of Surgery, 113(Supplement_8). https://doi.org/10.1093/bjs/znag087.256
Vancouver
Khanal N, Kathayat L, Aryal K. TPT 7.17 Standardising Docking Time in Robotic General Surgery: A Closed-Loop Audit Using Phase-Based Workflow Analysis. British Journal of Surgery. 2026;113(Supplement_8). doi:10.1093/bjs/znag087.256
BibTeX
@article{Khanal2026,
author = {Khanal, Nischal and Kathayat, Lok and Aryal, Kamal},
title = {TPT 7.17 Standardising Docking Time in Robotic General Surgery: A Closed-Loop Audit Using Phase-Based Workflow Analysis},
journal = {British Journal of Surgery},
year = {2026},
volume = {113},
number = {Supplement_8},
doi = {10.1093/bjs/znag087.256}
}
EUVIMED