Cleaning as high-risk activity for respiratory particulate exposure during additive manufacturing of sand moulds and its preceding silica sand coating process
Annals of Work Exposures and Health · 2025
DOI: 10.1093/annweh/wxaf010 ↗Kurz gefasst
Fachartikel in der Zeitschrift Annals of Work Exposures and Health, 2025. Verfasst von Ntoko Lucas Matlhatsi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Occupational Hygiene and Health Research Initiative (OHHRI), North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom, 2520, Sou…. Hauptthemen laut MEDLINE: Silicon Dioxide, Occupational Exposure, Sand, Inhalation Exposure. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: South African Department of Science and Innovation.
Abstract (Originalsprache)
Background
Occupational exposure to respirable crystalline silica (RCS) is a known cause of respiratory diseases, such as silicosis and lung cancer. Binder jetting additive manufacturing (AM) uses silica sand coated with sulphonic acid as feedstock material and operators are potentially exposed to RCS during various activities associated with AM. This includes the cleaning of the AM machine and associated equipment. This study aimed to investigate particulate exposures associated with additive manufacturing of sand moulds and its preceding silica sand coating process.
Methods
The particle size distribution (PSD) and particle shape analysis of different forms of silica sand (virgin, coated, and used) was determined using a Malvern Morphologi G3 automated microscope and the structural characteristics was measured using X-ray diffraction (XRD). Personal exposure and area monitoring for airborne respirable dust and RCS were performed using MDHS 14/4 and NIOSH 7602, while real-time particle number concentrations of 0.3 to 10 µm sized particles was measured using the TSI Aerosol Particle Counter (APC). Monitoring was performed for 2 operators over 8 d and included 3 d of coating, one day of cleaning the AM machine, and 4 d of printing during which 3 identical parts were manufactured.
Results
According to the PSD analysis, virgin and used silica sand particles were mostly in the respirable size range (d(0.9) = 3.98 ± 0.72 µm; and d(0.9) = 6.51 ± 2.71 µm, respectively), while coated sand was mostly in the inhalable size fraction d(0.5) = 29.76 ± 42.91 µm). The wt% results of the XRD analysis for the bulk virgin, coated and used silica sand were 97.3%, 92.6%, and 96.8% quartz, respectively. Personal exposure to RCS exceeded the exposure limit of 0.1 mg/m3 when the operator used compressed air to clean the coating machine’s filter (0.112 mg/m3) and exceeded the action level on the day the AM machine was cleaned (0.70 mg/m3). The results for real-time particle number concentrations of 0.3 to 10 µm sized particles showed peaks while the cleaning activities such as dry sweeping were performed.
Conclusion
The personal exposure to RCS was the highest on days when cleaning activities that used compressed air and dry sweeping took place. The high quartz content of the silica sand feedstock material and the respirable size of the virgin and used silica sand particles means that cleaning activities pose an RCS exposure risk to AM operators. Nine recommendations are made to reduce exposure to RCS during cleaning activities.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Occupational Hygiene and Health Research Initiative (OHHRI), North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom, 2520, South Africa.
ORCID-Profile: Sonette du Preez, Stephanus J L Linde
Förderung
- South African Department of Science and Innovation
Zitieren
APA
Matlhatsi, N. L., du Preez, S., Van Der Merwe, C. J., & Linde, S. J. L. (2025). Cleaning as high-risk activity for respiratory particulate exposure during additive manufacturing of sand moulds and its preceding silica sand coating process. Annals of Work Exposures and Health. https://doi.org/10.1093/annweh/wxaf010
Vancouver
Matlhatsi NL, du Preez S, Van Der Merwe CJ, Linde SJL. Cleaning as high-risk activity for respiratory particulate exposure during additive manufacturing of sand moulds and its preceding silica sand coating process. Annals of Work Exposures and Health. 2025. doi:10.1093/annweh/wxaf010
BibTeX
@article{Matlhatsi2025,
author = {Matlhatsi, Ntoko Lucas and du Preez, Sonette and Van Der Merwe, Cornelius J and Linde, Stephanus J L},
title = {Cleaning as high-risk activity for respiratory particulate exposure during additive manufacturing of sand moulds and its preceding silica sand coating process},
journal = {Annals of Work Exposures and Health},
year = {2025},
doi = {10.1093/annweh/wxaf010}
}
EUVIMED