EUVIMEDEUVIMED entdecken
Crossref

An In Situ -Gelling Conductive Hydrogel for Potential Use in Neural Tissue Engineering

Atefeh Amirabdollahian, Mohammad Moeini iD

Tissue Engineering Part A · 2024

DOI: 10.1089/ten.tea.2023.0359 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tissue Engineering Part A, 2024. Verfasst von Atefeh Amirabdollahian und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran. Hauptthemen laut MEDLINE: Tissue Engineering, Hydrogels, Nanotubes, Carbon, Electric Conductivity. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 67 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cerebral cavitation is usual following acute brain injuries, such as stroke and traumatic brain injuries, as well as after tumor resection. Minimally invasive implantation of an injectable scaffold in the cavity is a promising approach for potential regeneration of tissue loss. This study aimed at designing an in situ-gelling conductive hydrogel containing silk fibroin (SF), brain decellularized extracellular matrix (dECM), and carbon nanotubes (CNT) for potential use in brain tissue regeneration. Two percent w/v SF hydrogels with different concentrations of dECM (0.1%, 0.2%, or 0.3% w/v) and CNTs (0.05%, 0.1%, or 0.25% w/v) were fabricated and characterized. It was observed that with the addition of dECM, the porosity decreased, whereas swelling and electrical conductivity tended to increase. The addition of dECM also led to a faster resorption rate, but no significant change in compressive modulus. Addition of CNTs, on the other hand, led to a denser, stronger, and more regular porous structure, higher swelling ratio, faster gelation time, slower degradation rate, and a significant increase in electrical conductivity. dECM and CNTs combined together resulted in superior porosity, swelling, resorption rate, mechanical properties, and electrical conductivity compared with SF scaffolds containing only dECM or CNTs. Hydrogel samples containing 2% SF, 0.3% dECM, and 0.1% CNTs had a high porosity (58.9%), low swelling ratio (15.9%), high conductivity (2.35 × 10-4 S/m), and moderate degradation rate (37.3% after 21 days), appropriate for neural tissue engineering applications. Cell evaluation studies also showed that the hydrogel systems support the cell adhesion and growth, with no sign of significant cytotoxicity. Impact statement Tissue loss and formation of a fluid-filled cavity following stroke, traumatic brain injury, or brain tumor resection lead to sensorimotor and/or cognitive deficits. The lack of a healthy extracellular matrix in the cavity avoids the endogenous cell migration and axonal sprouting and may also worsen the secondary injuries to peri-lesional tissue. Due to the brain anatomy, simple implantation of tissue engineering scaffolds to the injured site is not possible in many cases. Therefore, the development of injectable scaffolds that support neural growth and differentiation is crucial for tissue repair or limiting the expansion of damage region.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringHydrogelsNanotubes, CarbonElectric ConductivityAnimalsRatsExtracellular MatrixTissue ScaffoldsPorosityFibroins

Stichwörter der Autor:innen

carbon nanotubeconductivedecellularized ECMin situ-gelling hydrogelsilk fibrointissue engineering

Substanzen

HydrogelsNanotubes, CarbonFibroins

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran.

ORCID-Profile: Mohammad Moeini

Zitieren

APA

Amirabdollahian, A., & Moeini, M. (2024). An In Situ -Gelling Conductive Hydrogel for Potential Use in Neural Tissue Engineering. Tissue Engineering Part A. https://doi.org/10.1089/ten.tea.2023.0359

Vancouver

Amirabdollahian A, Moeini M. An In Situ -Gelling Conductive Hydrogel for Potential Use in Neural Tissue Engineering. Tissue Engineering Part A. 2024. doi:10.1089/ten.tea.2023.0359

BibTeX
@article{Amirabdollahian2024,
  author = {Amirabdollahian, Atefeh and Moeini, Mohammad},
  title = {An In Situ -Gelling Conductive Hydrogel for Potential Use in Neural Tissue Engineering},
  journal = {Tissue Engineering Part A},
  year = {2024},
  doi = {10.1089/ten.tea.2023.0359}
}
Kostenlos starten →