EUVIMEDEUVIMED entdecken
Crossref

Soft Artificial Muscle Based on Pre-Detwinned Shape Memory Alloy Spring Actuator Achieving High Passive Assistive Torque for Wearable Robot

Jaeyeon Jeong iD, Minjae Cho iD, Ki-Uk Kyung iD

Soft Robotics · 01.10.2024 · 11 (5) · 835-844

DOI: 10.1089/soro.2023.0154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Soft Robotics, online erschienen am 14.10.2024. Verfasst von Jaeyeon Jeong und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Korea. Hauptthemen laut MEDLINE: Torque, Wearable Electronic Devices, Robotics, Equipment Design. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For designing the assistive wearable rehabilitation robots, it is challenging to design the robot as energy efficient because the actuators have to be capable of overcoming human loads such as gravity of the body and spastic torque continuously during the assistance. To address these challenges, we propose a novel design of soft artificial muscle that utilizes shape memory alloy (SMA) spring actuators with pre-detwinning process. The SMA spring was fabricated through a process called pre-detwinning, which enhances the linearity of the SMA spring in martensite phase and unpowered restoring force, which is called passive force. The fabricated SMA spring can contract >60%. Finally, the soft wearable robot that can assist not only the gravitational torque exerted on the elbow by passive force, but also the elbow movements with active force was designed with a soft artificial muscle. A soft artificial muscle consists of the bundles of pre-detwinned SMA springs integrated with the stretchable coolant vessel. The stiffness of the muscle was measured as 1125 N/m in martensite phase and 1732 N/m in austenite phase. In addition, the muscle showed great actuation frequency performances, the bandwidth of which was measured as 0.5 Hz. The proposed wearable mechanism can fully compensate the gravitational torque for all the angles in passive mode. In addition, the proposed mechanism can produce high torque up to 3.5 Nm and movements in active mode.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TorqueWearable Electronic DevicesRoboticsEquipment DesignHumansShape Memory AlloysAlloys

Stichwörter der Autor:innen

artificial musclesassistive robotsshape memory alloyssoft actuatorswearable robots

Substanzen

Shape Memory AlloysAlloys

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Korea.

ORCID-Profile: Jaeyeon Jeong, Minjae Cho, Ki-Uk Kyung

Zitieren

APA

Jeong, J., Cho, M., & Kyung, K. U. (2024). Soft Artificial Muscle Based on Pre-Detwinned Shape Memory Alloy Spring Actuator Achieving High Passive Assistive Torque for Wearable Robot. Soft Robotics, 11(5), 835-844. https://doi.org/10.1089/soro.2023.0154

Vancouver

Jeong J, Cho M, Kyung KU. Soft Artificial Muscle Based on Pre-Detwinned Shape Memory Alloy Spring Actuator Achieving High Passive Assistive Torque for Wearable Robot. Soft Robotics. 2024;11(5):835-844. doi:10.1089/soro.2023.0154

BibTeX
@article{Jeong2024,
  author = {Jeong, Jaeyeon and Cho, Minjae and Kyung, Ki-Uk},
  title = {Soft Artificial Muscle Based on Pre-Detwinned Shape Memory Alloy Spring Actuator Achieving High Passive Assistive Torque for Wearable Robot},
  journal = {Soft Robotics},
  year = {2024},
  volume = {11},
  number = {5},
  pages = {835--844},
  doi = {10.1089/soro.2023.0154}
}
Kostenlos starten →