EUVIMEDEUVIMED entdecken
Crossref

Improved Assistive Profile Tracking of Exosuit by Considering Adaptive Stiffness Model and Body Movement

Jihun Kim, Kimoon Nam, Seungtae Yang, Junyoung Moon, Jaeha Yang, Jaewook Ryu, Giuk Lee

Soft Robotics · 2025

DOI: 10.1089/soro.2023.0028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Soft Robotics, 2025. Verfasst von Jihun Kim und 6 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Chung-Ang University, Seoul, Republic of Korea. Hauptthemen laut MEDLINE: Robotics, Wearable Electronic Devices, Exoskeleton Device. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 19 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wearable robots have been developed to assist the physical performance of humans. Specifically, exosuits have attracted attention due to their lightweight and soft nature, which facilitate user movement. Although several types of force controllers have been used in exosuits, it is challenging to control the assistive force due to the material’s softness. In this study, we propose three methods to improve the performance of the basic controller using an admittance-based force controller. In method A, the cable was controlled according to the user’s thigh motion to eliminate delays in generating the assistive force and improve the control accuracy. In method B, the stiffness feedforward model of the human exosuit was divided into two independent models based on the assistance phase for compensating the nonlinear stiffness more accurately. In method C, the real-time optimization method for the stiffness feedforward model with an adaptive moment estimation method optimizer was proposed. To validate these methods’ effectiveness, we designed three new controllers, gradually combined the proposed methods with the basic controller, and compared their performances. We found that controller III, combining all three methods with the basic controller, showed the best performance. By applying controller III in the same exosuit, the root-mean-square error of the assistive force decreased from 39.84 N to 13.72 N, reducing the error by 65.56% compared with the basic controller. Moreover, the time delay for force generation in the gait cycle percentage decreased from 9.99% to 3.41%, reducing the delay by 65.87% compared with the basic controller.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RoboticsWearable Electronic DevicesExoskeleton DeviceHumansMovementBiomechanical PhenomenaEquipment DesignAlgorithmsSelf-Help Devices

Stichwörter der Autor:innen

adaptive controladaptive moment estimation (ADAM) optimizeradmittance controlhuman-suit stiffnesssoft exosuit

Autor:innen und Institutionen

  • Mechanical Engineering Department, Chung-Ang University, Seoul, Republic of Korea.
  • HUROTICS Inc., Seoul, Republic of Korea.

Zitieren

APA

Kim, J., Nam, K., Yang, S., Moon, J., Yang, J., Ryu, J., & Lee, G. (2025). Improved Assistive Profile Tracking of Exosuit by Considering Adaptive Stiffness Model and Body Movement. Soft Robotics. https://doi.org/10.1089/soro.2023.0028

Vancouver

Kim J, Nam K, Yang S, Moon J, Yang J, Ryu J, et al. Improved Assistive Profile Tracking of Exosuit by Considering Adaptive Stiffness Model and Body Movement. Soft Robotics. 2025. doi:10.1089/soro.2023.0028

BibTeX
@article{Kim2025,
  author = {Kim, Jihun and Nam, Kimoon and Yang, Seungtae and Moon, Junyoung and Yang, Jaeha and Ryu, Jaewook and Lee, Giuk},
  title = {Improved Assistive Profile Tracking of Exosuit by Considering Adaptive Stiffness Model and Body Movement},
  journal = {Soft Robotics},
  year = {2025},
  doi = {10.1089/soro.2023.0028}
}
Kostenlos starten →