EUVIMEDEUVIMED entdecken
Crossref

Out-of-Plane Soft Lithography for Soft Pneumatic Microactuator Arrays

Edoardo Milana iD, Benjamin Gorissen iD, Eline De Borre, Frederik Ceyssens, Dominiek Reynaerts, Michael De Volder

Soft Robotics · 01.02.2023 · 10 (1) · 197-204

DOI: 10.1089/soro.2021.0106 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Soft Robotics, online erschienen am 14.02.2023. Verfasst von Edoardo Milana und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, KU Leuven and Flanders Make, Leuven, Belgium. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 25 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Elastic pneumatic actuators are fueling new devices and applications in soft robotics. Actuator miniaturization is critical to enable soft microsystems for applications in microfluidics and micromanipulation. This work proposes a fabrication technique to make out-of-plane bending microactuators entirely by soft lithography. The only bonding step required is to seal the embedded fluidic channels, assuring the structural integrity of the microactuators. The process consists of fabricating two SU8 mold halves using different lithographic layers. Polydimethilsiloxane is poured on the bottom mold, which is subsequently aligned and assembled with the top mold. The process allows for out-of-plane actuators with a diameter of 300 μm and for fabricating arrays of up to 36 actuators that are row addressable. These active micropillars have an aspect ratio of 1:1.5 and, when pressurized at 1 bar, show a bending angle of ∼30°.

Schlagwörter

Stichwörter der Autor:innen

active pillarsartificial ciliasoft bending microactuatorssoft lithographysoft robotics

Autor:innen und Institutionen

  • Department of Mechanical Engineering, KU Leuven and Flanders Make, Leuven, Belgium.
  • Department of Electrical Engineering (ESAT), KU Leuven, Leuven, Belgium.
  • Department of Engineering, Institute for Manufacturing, University of Cambridge, Cambridge, United Kingdom.

ORCID-Profile: Edoardo Milana, Benjamin Gorissen

Zitieren

APA

Milana, E., Gorissen, B., De Borre, E., Ceyssens, F., Reynaerts, D., & De Volder, M. (2023). Out-of-Plane Soft Lithography for Soft Pneumatic Microactuator Arrays. Soft Robotics, 10(1), 197-204. https://doi.org/10.1089/soro.2021.0106

Vancouver

Milana E, Gorissen B, De Borre E, Ceyssens F, Reynaerts D, De Volder M. Out-of-Plane Soft Lithography for Soft Pneumatic Microactuator Arrays. Soft Robotics. 2023;10(1):197-204. doi:10.1089/soro.2021.0106

BibTeX
@article{Milana2023,
  author = {Milana, Edoardo and Gorissen, Benjamin and De Borre, Eline and Ceyssens, Frederik and Reynaerts, Dominiek and De Volder, Michael},
  title = {Out-of-Plane Soft Lithography for Soft Pneumatic Microactuator Arrays},
  journal = {Soft Robotics},
  year = {2023},
  volume = {10},
  number = {1},
  pages = {197--204},
  doi = {10.1089/soro.2021.0106}
}
Kostenlos starten →