EUVIMEDEUVIMED entdecken
Open Access

Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting

Shuimiao Wei, Pan Ma iD, Yacheng Fang, Zhiyu Zhang, Zhilu Yang, Xuerong Shi, Konda Gokuldoss Prashanth iD

3D Printing and Additive Manufacturing · 01.04.2024 · 11 (2) · 628-637

DOI: 10.1089/3dp.2022.0142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 16.04.2024. Verfasst von Shuimiao Wei und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The equiatomic AlCoCrFeNi high entropy alloy (HEA) is prone to cracking during the additive manufacturing process due to the high cooling rates observed, which limits its application to a large extent. In this study, the selective laser melting (SLM) technique was adopted to fabricate the alloy and the mechanism of crack formation was revealed. Most importantly, a new design strategy was proposed to suppress the generation of cracks, and the optimization of the preparation process was also studied in detail. It is found that the interlaminar crack is related to the heat input at the edge of the specimen, and the internal cracks are formed by solidification cracks. Alloys without interlaminar crack can be prepared by means of combination of the side inclination angle and the process parameters. Side inclination angle optimization provides a possibility for the preparation of crack-free AlCoCrFeNi HEA by SLM.

Schlagwörter

Stichwörter der Autor:innen

AlCoCrFeNicrackhigh entropy alloyselective laser melting

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai, China.
  • State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, China.
  • Institute for Composites Science Innovation (InCSI), School of Materials Science and Engineering, Zhejiang University, Hangzhou, China.
  • Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia.
  • Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria.
  • CBCMT, School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India.

ORCID-Profile: Pan Ma, Konda Gokuldoss Prashanth

Zitieren

APA

Wei, S., Ma, P., Fang, Y., Zhang, Z., Yang, Z., Shi, X., & Prashanth, K. G. (2024). Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting. 3D Printing and Additive Manufacturing, 11(2), 628-637. https://doi.org/10.1089/3dp.2022.0142

Vancouver

Wei S, Ma P, Fang Y, Zhang Z, Yang Z, Shi X, et al. Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting. 3D Printing and Additive Manufacturing. 2024;11(2):628-637. doi:10.1089/3dp.2022.0142

BibTeX
@article{Wei2024,
  author = {Wei, Shuimiao and Ma, Pan and Fang, Yacheng and Zhang, Zhiyu and Yang, Zhilu and Shi, Xuerong and Prashanth, Konda Gokuldoss},
  title = {Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting},
  journal = {3D Printing and Additive Manufacturing},
  year = {2024},
  volume = {11},
  number = {2},
  pages = {628--637},
  doi = {10.1089/3dp.2022.0142}
}
Kostenlos starten →