Design of Lattice Structures Based on U* Load Path Analysis
3D Printing and Additive Manufacturing · 01.12.2023 · 10 (6) · 1361-1370
DOI: 10.1089/3dp.2022.0018 ↗Kurz gefasst
Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 11.12.2023. Verfasst von Shengjie Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Manitoba, Winnipeg, Canada. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
Lattice structures are widely used in lightweight structural components and energy absorption parts. While topology optimization addresses desirable density distribution in lattice structures, there is yet no definitive solution for finding an optimum lattice layout. Since load path analysis can reveal the most efficient route for load transfer, it is preferable to align the lattice trusses with load paths for optimal structural performance. In this work, U* load path analysis is used to tailor the unit cell geometries of body-centered cubic lattice structures. The lattice layout is first determined by stiffness lines and potential lines derived from U* field in the design domain. The truss diameters are then numerically optimized to generate the lattice structure with functionally graded properties. This methodology is validated by a design problem of a cantilever structure. Results from finite element simulations and experimental tests on specimens fabricated by selective laser sintering demonstrate that the U* graded design has a significantly higher specific stiffness and strength compared with the benchmark design with a uniform cell arrangement. This approach enables engineers to create new design concepts of lattice structures with the integration of physically determined load paths.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of Manitoba, Winnipeg, Canada.
- Department of Mechanical Engineering, Yanshan University, Qinhuangdao, China.
ORCID-Profile: Nan Wu
Zitieren
APA
Zhao, S., Song, D., Wu, N., & Wu, F. (2023). Design of Lattice Structures Based on U* Load Path Analysis. 3D Printing and Additive Manufacturing, 10(6), 1361-1370. https://doi.org/10.1089/3dp.2022.0018
Vancouver
Zhao S, Song D, Wu N, Wu F. Design of Lattice Structures Based on U* Load Path Analysis. 3D Printing and Additive Manufacturing. 2023;10(6):1361-1370. doi:10.1089/3dp.2022.0018
BibTeX
@article{Zhao2023,
author = {Zhao, Shengjie and Song, Dezhuang and Wu, Nan and Wu, Fenghe},
title = {Design of Lattice Structures Based on U* Load Path Analysis},
journal = {3D Printing and Additive Manufacturing},
year = {2023},
volume = {10},
number = {6},
pages = {1361--1370},
doi = {10.1089/3dp.2022.0018}
}
EUVIMED