Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine
3D Printing and Additive Manufacturing · 01.12.2023 · 10 (6) · 1309-1319
DOI: 10.1089/3dp.2021.0194 ↗Kurz gefasst
Fachartikel in der Zeitschrift 3D Printing and Additive Manufacturing, online erschienen am 11.12.2023. Verfasst von Marwane Rouway und 5 weiteren Autor:innen. Beteiligte Einrichtung: LPMAT Laboratory, FSAC, Hassan II University, Casablanca, Morocco. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
The global trend in additive manufacturing is the technology of three-dimensional (3D) printing with a high potential to avoid some of the weaknesses of conventional fabrication techniques. This new technology has been used to manufacture small tidal and wind turbines. In isolated areas, small turbines can be manufactured and assembled on-site for green energy production. The purpose of this document is to evaluate the thermomechanical behavior of a printed tidal turbine using Digimat-AM (Additive Manufacturing) with fused filament fabrication method. The finite element computes the mechanical deflection, temperature, residual stresses, and warpage fields of the printed part. The composites used during printing are thermoplastic polymers (acrylonitrile butadiene styrene, polyamide 6 [PA6], polyamide 12 [PA12], and polyetherimide [PEI]) reinforced with carbon and glass fillers in the form of fibers and beads (CF/GF and CB/GB). Through the simulation, one could show that the blade printed with PEI-CB/CF has excellent mechanical performance of low mechanical deflection and warpage, compared to PA6-CB/CF. In addition, the fiber-shaped fillers are better than the bead-shaped ones for the 3D printing process. In general, this study has shown the potential and feasibility of 3D printing as an excellent opportunity in the fabrication of small blades in the future, but more studies are required to understand this potential.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- LPMAT Laboratory, FSAC, Hassan II University, Casablanca, Morocco.
- REMTEX Laboratory, ESITH, Casablanca, Morocco.
- IRDL Laboratory, UMR-CNRS 6027, ENSTA Bretagne, Brest, France.
- LN2 Laboratory, CNRS, Sherbrooke University, Sherbrooke, Canada.
ORCID-Profile: Marwane Rouway
Zitieren
APA
Rouway, M., Tarfaoui, M., Chakhchaoui, N., Omari, L. E. H., Fraija, F., & Cherkaoui, O. (2023). Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine. 3D Printing and Additive Manufacturing, 10(6), 1309-1319. https://doi.org/10.1089/3dp.2021.0194
Vancouver
Rouway M, Tarfaoui M, Chakhchaoui N, Omari LEH, Fraija F, Cherkaoui O. Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine. 3D Printing and Additive Manufacturing. 2023;10(6):1309-1319. doi:10.1089/3dp.2021.0194
BibTeX
@article{Rouway2023,
author = {Rouway, Marwane and Tarfaoui, Mostapha and Chakhchaoui, Nabil and Omari, Lhaj El Hachemi and Fraija, Fouzia and Cherkaoui, Omar},
title = {Additive Manufacturing and Composite Materials for Marine Energy: Case of Tidal Turbine},
journal = {3D Printing and Additive Manufacturing},
year = {2023},
volume = {10},
number = {6},
pages = {1309--1319},
doi = {10.1089/3dp.2021.0194}
}
EUVIMED