EUVIMEDEUVIMED entdecken
Crossref

Effect of fuel injection pressure on performance, combustion, and emission characteristics of a Karanja biodiesel fuelled CI engine

P Pratap Naidu, Katam Ganesh Babu, Hari Narayan Singh Yadav, A Veeresh Babu, Amarnath Gundalabhagavan, Ganesh S Warkhade, K Vijaya Kumar

Engineering Research Express · 01.06.2026 · 8 (11) · 115513

DOI: 10.1088/2631-8695/ae72fa ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Research Express, online erschienen am 04.06.2026. Verfasst von P Pratap Naidu und 6 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An experimental analysis was conducted to study the operating behaviour of a compression ignition (CI) engine with conventional diesel and Karanja Oil Methyl Ester (KOME) as fuel. The engine was tested over a wide range of load conditions and at different fuel injection pressures that varies between 190 and 250 bar. The Engine performance was evaluated using brake thermal efficiency (BTE), brake specific energy consumption (BSEC), and exhaust gas temperature. Combustion parameters were examined by analysing rate of pressure rise, net heat release pattern, cylinder pressure variation and mean in-cylinder gas temperature. The effect of fuel type and injection pressure on exhaust emissions (carbon monoxide, unburned hydrocarbons, carbon dioxide, nitrogen oxides, and smoke opacity) were investigated experimentally. The results shows that an increase in BTE and a decrease in BSEC with load for all fuels, while diesel fuel delivering the best performance. KOME exhibits a BTE penalty of 5%–15% when compared to diesel that reducing to approximately 1% at 60% load and 190 bar injection pressure. BSEC for KOME is 5%–17% higher than diesel across all conditions. The difference is now less than 2% at medium load and 190 bar. KOME at 230 bar demonstrates the smooth combustion with 8%–14% reduction in peak RoPR, also 12%–16% reduction in peak net heat release rate compared to diesel. At 250 bar, significant reductions observed for KOME in CO, unburnt hydrocarbon, and smoke opacity with moderate penalty in oxides of nitrogen emissions. The novelty of this work lies in identifying injection pressure specific operating conditions for KOME 190 bar for performance, 230 bar for better combustion, and 250 bar for emission control representing injection pressure as a practical parameter to optimize the operation of CI engine without any modification of hardware.

Zitieren

APA

Naidu, P. P., Babu, K. G., Yadav, H. N. S., Babu, A. V., Gundalabhagavan, A., Warkhade, G. S., & Kumar, K. V. (2026). Effect of fuel injection pressure on performance, combustion, and emission characteristics of a Karanja biodiesel fuelled CI engine. Engineering Research Express, 8(11), 115513. https://doi.org/10.1088/2631-8695/ae72fa

Vancouver

Naidu PP, Babu KG, Yadav HNS, Babu AV, Gundalabhagavan A, Warkhade GS, et al. Effect of fuel injection pressure on performance, combustion, and emission characteristics of a Karanja biodiesel fuelled CI engine. Engineering Research Express. 2026;8(11):115513. doi:10.1088/2631-8695/ae72fa

BibTeX
@article{Naidu2026,
  author = {Naidu, P Pratap and Babu, Katam Ganesh and Yadav, Hari Narayan Singh and Babu, A Veeresh and Gundalabhagavan, Amarnath and Warkhade, Ganesh S and Kumar, K Vijaya},
  title = {Effect of fuel injection pressure on performance, combustion, and emission characteristics of a Karanja biodiesel fuelled CI engine},
  journal = {Engineering Research Express},
  year = {2026},
  volume = {8},
  number = {11},
  pages = {115513},
  doi = {10.1088/2631-8695/ae72fa}
}
Kostenlos starten →